Headlamp Washer Jet Installation - Land Rovers Only

W7412R · 12-02-2006, 12:16 PM

Hi all, can anyone walk me through the proper installation procedure for the headlamp jet assembly? Mine appears to have broken off from underneath partially, as the assembly is still mounted onto the bumper, but can rotate freely around its mounting point. It also seems that the hose broke off from the jet. Probably happened at the car wash.

Can anyone advise?

Thanks!!!

Warren

Rovin4life · 12-02-2006, 12:29 PM

its a simple philips head screwdriver and a pick and a pair of pliers. use the pick to take off the screw cover and a the screwdriver to take it out. But use the pliers to pull up the hose.

its easier to reuse the hose from the previous washer.

12-02-2006, 12:16 PM	#1 (permalink)
W7412R Member Join Date: Mar 2005 Posts: 23 Gallery: 0	Headlamp Washer Jet Installation Hi all, can anyone walk me through the proper installation procedure for the headlamp jet assembly? Mine appears to have broken off from underneath partially, as the assembly is still mounted onto the bumper, but can rotate freely around its mounting point. It also seems that the hose broke off from the jet. Probably happened at the car wash. Can anyone advise? Thanks!!! Warren

12-02-2006, 12:29 PM	#2 (permalink)
Rovin4life Former NAS LR TECH, Current AUS LR TECH Join Date: Oct 2005 Location: DOWN UNDER Posts: 1,884 Gallery: 0	its a simple philips head screwdriver and a pick and a pair of pliers. use the pick to take off the screw cover and a the screwdriver to take it out. But use the pliers to pull up the hose. its easier to reuse the hose from the previous washer. __________________ I work on Rovers. Got a question just ask.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)