![]() |
![]() |
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Member
Join Date: Nov 2004
Location: Fairbanks, Alaska
Posts: 2
Gallery:
0
|
I drive a 2000 Disco with about 60,000 miles on it. At the beginning of last summer I had to replace an ignition coil when my #8 cylinder stopped firing. This summer, right after the temperature started to warm up, my #5 and #8 stopped working. I am told the ignition coils need to be replaced again! Is there something I can do to make these coils to last longer?? I can only assume it may have something to do with the extreme temperature differences. (-60F in the winter to 80F in the summer), but no one can tell me why. Also, since I have to order the parts off the internet, which may take a week or so, how safe on the car is it to drive without 2 cylinders firing?
|
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Super Moderator
Join Date: Dec 2004
Posts: 1,819
Gallery:
0
|
Coil failure is usually the result of neglecting the vehicles ignition, mainly worn spark plugs, and/or, open circuit spark plug leads. This causes the coil/s to perform at maximum output. The increase in the voltage demand means more current flowing through the coil/s primary circuit, and, this primary current flow can overload the power stage primary transistor. The increased secondary current created by the ignition coil/s can increase to the point that it perforates the secondary circuit in the coil itself.
Defective ignition coil/s, are sensitive to extreme changes in ambient temperature. Hope this helps.
__________________
No hand signals, driver playing with his transfer Knob. |
|
|
|
|
|
#3 (permalink) | |
|
Member
Join Date: May 2005
Location: Chicago,Illinois
Posts: 73
Gallery:
0
|
Quote:
|
|
|
|
|
| Sponsored Links | |
Advertisement |
|