Let me see your Lights.... - Land Rovers Only

BlueLion · 08-06-2006, 06:13 AM

Fellas, I am wanting to add some lights to the truck since my passenger side fog is bad. I replaced the buld in my driver side and who ever had the truck before me replaced the passenger side buld incorrectly and it is melted and stuck in the socket. Anyway, considering mounting new lights and just want to get an idea of what to do. I am also thinking of replacing the bumper for a more rugged look. I will keep my old one just in case I want to put it back.

Disco Mike · 08-06-2006, 07:14 AM

There really isn't alot you can mount when using the factory bumper do to a lack of support in the bumper to hold the lights without vibrating.
There are alot of aftermarket bumpers, new and used out there, the only draw back there would be you may need to replace your front springs if the new bumper is too heavy, but that is not a big deal when you consider the end result of how your truck would look.
Mike

BlueLion · 08-06-2006, 04:57 PM

As always thanks mike. I was also considering a brush bar as a way to mount some lights. I will have to continue to research.

08-06-2006, 06:13 AM	#1 (permalink)
BlueLion Member Join Date: Jan 2006 Posts: 99 Gallery: 0	Let me see your Lights.... Fellas, I am wanting to add some lights to the truck since my passenger side fog is bad. I replaced the buld in my driver side and who ever had the truck before me replaced the passenger side buld incorrectly and it is melted and stuck in the socket. Anyway, considering mounting new lights and just want to get an idea of what to do. I am also thinking of replacing the bumper for a more rugged look. I will keep my old one just in case I want to put it back.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-06-2006, 07:14 AM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,784 Gallery: 0	There really isn't alot you can mount when using the factory bumper do to a lack of support in the bumper to hold the lights without vibrating. There are alot of aftermarket bumpers, new and used out there, the only draw back there would be you may need to replace your front springs if the new bumper is too heavy, but that is not a big deal when you consider the end result of how your truck would look. Mike

08-06-2006, 04:57 PM	#3 (permalink)
BlueLion Member Join Date: Jan 2006 Posts: 99 Gallery: 0	As always thanks mike. I was also considering a brush bar as a way to mount some lights. I will have to continue to research.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)