Magnacore wires - Land Rovers Only

02DISCOBLK · 08-07-2006, 08:14 AM

I am wanting to know of the best place to get the magnacore wires? Also what kind of difference can you notice over the stock plugs and wires?

Thanks

Disco Mike · 08-07-2006, 08:20 AM

Go to Rover Connection, do yourself a favor and buy a set of Bosh Platium Plus 4's and you will get a lot of low end torque.
Mikee

02DISCOBLK · 08-07-2006, 08:41 AM

That sound great. Thanks alot.

02DISCOBLK · 08-07-2006, 08:43 AM

They are the 8mm wires correct?

Disco Mike · 08-07-2006, 09:17 AM

Quote:

Originally Posted by 02DISCOBLK

They are the 8mm wires correct?

Yes
You know they are going to be a bugger to put on, do you have a small hand or are you going to remove the top half of the intake manifold?
Mike

02DISCOBLK · 08-07-2006, 12:22 PM

I do have a semi small hand. Which way is the easiest? Taking the instake off.

Disco Mike · 08-07-2006, 01:47 PM

When the engine is cool, take your habd and follow the wires back to the coil pcks, if you can work your way in there that will be great if not off comes the intaks.
Mike

Muddy Oval · 08-08-2006, 11:47 AM

I got mine from 4x4AG. Haven't installed them yet- not looking forward to it since I have big hands AND secondary air injection. What a PITA.

Disco Mike · 08-08-2006, 01:21 PM

Quote:

Originally Posted by Muddy Oval

I got mine from 4x4AG. Haven't installed them yet- not looking forward to it since I have big hands AND secondary air injection. What a PITA.

Steve,
You think you have large hands, you should see mine, not a chance in the world for mine to fit back there.
Mike

08-07-2006, 08:14 AM	#1 (permalink)
02DISCOBLK Member Join Date: Mar 2006 Posts: 58 Gallery: 0	Magnacore wires I am wanting to know of the best place to get the magnacore wires? Also what kind of difference can you notice over the stock plugs and wires? Thanks

08-08-2006, 11:47 AM	#8 (permalink)
Muddy Oval Otherwise known as STEVE Join Date: Oct 2005 Location: Vermont Posts: 1,968 Gallery: 0	I got mine from 4x4AG. Haven't installed them yet- not looking forward to it since I have big hands AND secondary air injection. What a PITA. __________________ 2002 Freelander 2000 DII w/CDL 1967 SIIA 109SW Former Rovers 2004 Modded "S" Disco, R.I.P. 2004 G4 Disco 2002 Modded Freelander 1995 Modded Disco 1994 D-90 #8 1993 NAS D110 1990 Range Rover County 1973 SIII 88 1972 Range Rover 2 door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-07-2006, 08:20 AM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,784 Gallery: 0	Go to Rover Connection, do yourself a favor and buy a set of Bosh Platium Plus 4's and you will get a lot of low end torque. Mikee

08-07-2006, 08:41 AM	#3 (permalink)
02DISCOBLK Member Join Date: Mar 2006 Posts: 58 Gallery: 0	That sound great. Thanks alot.

08-07-2006, 08:43 AM	#4 (permalink)
02DISCOBLK Member Join Date: Mar 2006 Posts: 58 Gallery: 0	They are the 8mm wires correct?

08-07-2006, 12:22 PM	#6 (permalink)
02DISCOBLK Member Join Date: Mar 2006 Posts: 58 Gallery: 0	I do have a semi small hand. Which way is the easiest? Taking the instake off.

08-07-2006, 01:47 PM	#7 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,784 Gallery: 0	When the engine is cool, take your habd and follow the wires back to the coil pcks, if you can work your way in there that will be great if not off comes the intaks. Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)