Mounting hardware for DII Hitch Receiver? - Land Rovers Only

afpilot · 07-11-2005, 06:44 PM

Anybody know the size and threads of the bolts that mount the DII hitch receiver to the frame? There are two bolts on the main assembly that screw into the frame, and two bolts with nuts that bolt the ends of the V-Brace to the frame. I bought a used hitch receiver, but it didn't come with any mounting hardware. I'm planning to go to lowes to buy the bolts/nuts/washers, but don't know what size.
Thanks

adigerol · 07-15-2005, 10:33 AM

I would go buy a thread pitch gauge, you can get that at loews as well, that will tell you the right pitch at least.

07-11-2005, 06:44 PM	#1 (permalink)
afpilot Member Join Date: Jun 2005 Posts: 4 Gallery: 0	Mounting hardware for DII Hitch Receiver? Anybody know the size and threads of the bolts that mount the DII hitch receiver to the frame? There are two bolts on the main assembly that screw into the frame, and two bolts with nuts that bolt the ends of the V-Brace to the frame. I bought a used hitch receiver, but it didn't come with any mounting hardware. I'm planning to go to lowes to buy the bolts/nuts/washers, but don't know what size. Thanks

07-15-2005, 10:33 AM	#2 (permalink)
adigerol Member Join Date: Aug 2004 Location: Fountain Hills, AZ Posts: 23 Gallery: 0	I would go buy a thread pitch gauge, you can get that at loews as well, that will tell you the right pitch at least. __________________ 2000 Discovery II Stock 4 now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)