OEM Pushbar/Grill guard - Page 2 - Land Rovers Only

HMBRover · 11-07-2007, 06:52 PM

You can also get the instructions from Land Rover Owner Information at the link:
http://www.ownerinfo.landrover.com/e...prod/index.jsp

Enter the menu choices for Discovery II and Accessory Fitting Instructions
Look for "Protection Bar - Wrap Around"

I have the same bar on my G4 without the headlamp wraparounds so if you need detailed pictures let me know. I've had it off several times. It appears you have to drill two large holes in the OE bumper and then another hole inside; then a nutsert is intsalled to mount the bar to. Two of the three grill bolts under the bonnet are also replaced with nutserts to attach the upper tabs.

HTH

11-07-2007, 06:52 PM	#16 (permalink)
HMBRover Member Join Date: Jan 2007 Location: Half Moon Bay, CA Posts: 41 Gallery: 0	You can also get the instructions from Land Rover Owner Information at the link: http://www.ownerinfo.landrover.com/e...prod/index.jsp Enter the menu choices for Discovery II and Accessory Fitting Instructions Look for "Protection Bar - Wrap Around" I have the same bar on my G4 without the headlamp wraparounds so if you need detailed pictures let me know. I've had it off several times. It appears you have to drill two large holes in the OE bumper and then another hole inside; then a nutsert is intsalled to mount the bar to. Two of the three grill bolts under the bonnet are also replaced with nutserts to attach the upper tabs. HTH __________________ Brian 2004 Discovery II G4 Edition 2002 Freelander SE - Gone! Formerly HMBFreelander

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)