rotoflex - Land Rovers Only

bama · 07-27-2006, 12:59 PM

can anyone provide me with a link on directions on removing and installing my rotoflex on a 02 disco.

roverX · 07-27-2006, 01:40 PM

6 bolts = 10 minute job Just undo the bolts and slap the new one in.

Disco Mike · 07-27-2006, 04:41 PM

5 minutes if you don't have a can of beer with Steven first.
You only need one open end wrench and one socket, nothing to it.
Mike

bama · 07-29-2006, 07:29 AM

ok done u-joints with new zerk fittings and rotoflex piece and still have a slight vibration! i dont think it is anything serious just kind of bothersome

Disco Mike · 07-29-2006, 09:24 AM

Quote:

Originally Posted by bama

ok done u-joints with new zerk fittings and rotoflex piece and still have a slight vibration! i dont think it is anything serious just kind of bothersome

So, you could still have one of the following problems,
tire balance,
drive line balance problem
separated tire tread
mud inside a wheel
At what speed does it show up?
Mike

07-27-2006, 12:59 PM	#1 (permalink)
bama Senior Member Join Date: Jul 2006 Location: acworth Ga Posts: 340 Gallery: 0	rotoflex can anyone provide me with a link on directions on removing and installing my rotoflex on a 02 disco.

07-27-2006, 01:40 PM	#2 (permalink)
roverX Elephantitis penisitis Join Date: Apr 2005 Posts: 5,439 Gallery: 0	6 bolts = 10 minute job Just undo the bolts and slap the new one in. __________________ What? Is this where I'm supposed to write some profound statement that boggles the intellect of the genius that you think you are? Why would I waste my time with that when I can be getting free lap dances from your sister AND your girlfriend at the same time?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

07-27-2006, 04:41 PM	#3 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,775 Gallery: 0	5 minutes if you don't have a can of beer with Steven first. You only need one open end wrench and one socket, nothing to it. Mike

07-29-2006, 07:29 AM	#4 (permalink)
bama Senior Member Join Date: Jul 2006 Location: acworth Ga Posts: 340 Gallery: 0	ok done u-joints with new zerk fittings and rotoflex piece and still have a slight vibration! i dont think it is anything serious just kind of bothersome

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)