SES light went out??? - Land Rovers Only

6cuda6 · 05-15-2006, 11:33 AM

Humm i don't know what happened....Service engine soon light went out the other day. The only thing i changed was the rear air springs [as one was leaking down after a day or so of sitting}....i thought that if this was the case i would put a "hard code" in the computer and the light would stay lit???

Oh well, don't really care because the light is out now but this maybe the cause of others problems as well as the guy that i got the truck from said he had it checked for the SES and they could never find the problem......

later, Dean

OkieRover · 05-15-2006, 01:35 PM

Probably burned out....just kidding.

6cuda6 · 05-15-2006, 02:35 PM

I thought of that...lol....

Disco Mike · 05-15-2006, 04:10 PM

If I remember right, there is a warning light for the SLS if it overheats, if it has a problem it store it on the CEL, I had that one time with mine.
Mike

Rovin4life · 05-15-2006, 06:08 PM

whenever an abs code is stored in the computer if the problem exists for a while it will turn off the misfire monitor and turn on the CEL.

Basicailly when you go offroading it turns off the misfire monitor. Even taking out a fuse for the SLS and ABS will turn on the CEL.

rough road code is given. 1378 I think. I need to research it.

anyway, the SRS lite is most likely your pretensioner. We have alot of those problems and just replace the pretensioner. Its not uncommon for it to come on and off every now and then. The code is stored in the SRS module until you turn it off.

LANDY96 · 05-16-2006, 10:34 AM

Quote:

Originally Posted by OkieRover

Probably burned out....just kidding.

Well, on the DII I just bought, I was told by the PO, that the Light DID burn out

. He did buy a new instument cluster, but he said that the computer wouldn't recognize the new cluster, for some reason.

Anyone know why not!?

05-15-2006, 11:33 AM	#1 (permalink)
6cuda6 Senior Member Join Date: Apr 2006 Posts: 299 Gallery: 0	SES light went out??? Humm i don't know what happened....Service engine soon light went out the other day. The only thing i changed was the rear air springs [as one was leaking down after a day or so of sitting}....i thought that if this was the case i would put a "hard code" in the computer and the light would stay lit??? Oh well, don't really care because the light is out now but this maybe the cause of others problems as well as the guy that i got the truck from said he had it checked for the SES and they could never find the problem...... later, Dean

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

05-15-2006, 02:35 PM	#3 (permalink)
6cuda6 Senior Member Join Date: Apr 2006 Posts: 299 Gallery: 0	I thought of that...lol....

05-15-2006, 04:10 PM	#4 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,785 Gallery: 0	If I remember right, there is a warning light for the SLS if it overheats, if it has a problem it store it on the CEL, I had that one time with mine. Mike

05-15-2006, 06:08 PM	#5 (permalink)
Rovin4life Former NAS LR TECH, Current AUS LR TECH Join Date: Oct 2005 Location: DOWN UNDER Posts: 1,884 Gallery: 0	whenever an abs code is stored in the computer if the problem exists for a while it will turn off the misfire monitor and turn on the CEL. Basicailly when you go offroading it turns off the misfire monitor. Even taking out a fuse for the SLS and ABS will turn on the CEL. rough road code is given. 1378 I think. I need to research it. anyway, the SRS lite is most likely your pretensioner. We have alot of those problems and just replace the pretensioner. Its not uncommon for it to come on and off every now and then. The code is stored in the SRS module until you turn it off.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)