Steering Wheel Offcenter - Land Rovers Only

bama · 05-10-2007, 01:30 PM

ok guys i need some help, just did my alignment and my toe is good, but my steering wheel is offcenter, how do i center the steering wheel in my 02 disco???

Roverhound · 05-11-2007, 03:30 AM

It's adjusted in the front using the drag link.
Where the steering box is attached to the drag link you will see a couple of clamps and an adjuster with right hand threads on one side and left hand on the other. Loosen the clamps and turn the adjuster one way or the other to give the wheel the proper orientation.
Probably easiest if the truck is jacked up but not neccessary.

Rovin4life · 05-11-2007, 04:14 AM

make sure everything is loose so you can adjust it then move it accordingly, bring the tools with you and drive a bit down the road to determine the position of the wheel. then if its off get underneath and adjust again and keep doing it till its works always retightening as you go along.

05-10-2007, 01:30 PM	#1 (permalink)
bama Senior Member Join Date: Jul 2006 Location: acworth Ga Posts: 338 Gallery: 0	Steering Wheel Offcenter ok guys i need some help, just did my alignment and my toe is good, but my steering wheel is offcenter, how do i center the steering wheel in my 02 disco??? __________________ Robbie Acworth Ga--thats Northwest of Atlanta (ATL MOFO) "The more people I meet the more I like my dogs" "the garage" 2002 Discovery(my baby 2" OME LIFT 265/75/16 Mickey Thompson mtz's discovery pushbar 2005 Nissan Sentra 1.8s

05-11-2007, 03:30 AM	#2 (permalink)
Roverhound Senior Member Join Date: Oct 2005 Location: Harrisonburg, Virginia Posts: 730 Gallery: 0	It's adjusted in the front using the drag link. Where the steering box is attached to the drag link you will see a couple of clamps and an adjuster with right hand threads on one side and left hand on the other. Loosen the clamps and turn the adjuster one way or the other to give the wheel the proper orientation. Probably easiest if the truck is jacked up but not neccessary. __________________ It just doesn't matter.

05-11-2007, 04:14 AM	#3 (permalink)
Rovin4life Former NAS LR TECH, Current AUS LR TECH Join Date: Oct 2005 Location: DOWN UNDER Posts: 1,859 Gallery: 0	make sure everything is loose so you can adjust it then move it accordingly, bring the tools with you and drive a bit down the road to determine the position of the wheel. then if its off get underneath and adjust again and keep doing it till its works always retightening as you go along. __________________ I work on Rovers. Got a question just ask.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)