will it fit - Land Rovers Only

drum655 · 01-09-2006, 09:45 AM

will a new tjm bumper fit in the rear of my disco? i am driving to knoxville to get it from the distributor and i need to know if it will fit....hopefully it will

Disco Mike · 01-09-2006, 10:31 AM

If TJM say's it will fit it will, they do quality work.
Are you going to be doing alot of wheeling, if si consider the MT's instead of the AT's, much better tire off the road and an equal on the road.
Mike J.

Disco Mike · 01-09-2006, 10:57 AM

Or do you mean will it fit in the inside of your Truck???
Yes it should.
Mike J.

Badger1 · 01-09-2006, 12:04 PM

Picked up a used ARB bumper from a guy in guess where......Knoxville! The bumper just fit, and we brought our dog too so you should be fine. Bring some old blankets so it won't bang/scratch up your interior.

drum655 · 01-09-2006, 12:08 PM

AWESOME>>>> you guys wish me the best of luck...i hope the install is easy...it should be i am assuming

Badger1 · 01-09-2006, 12:14 PM

The hardest part of the install is getting the bumper on the truck! Have a helper lined up when you want to install and some of the stock bolts might be a little tight. No biggy, took my wife and myself maybe an houf and a half start to finish. Real straight forward. Good luck!

rmuller · 01-09-2006, 12:19 PM

Yup it fits.. mine did at least.

Installation is straight-forward.. get some pb-blaster (or wd-40), soak down all the old stuff for an hour or so before you unbolt it.. and definitely have a helper lift the bumper.. it took me about 3-4 hours to do mine w/o a helper.. the worst was trying to get the old bolts out.. the next hardest was trying to balance the bumper on my leg while putting the bolts in!

Badger1 · 01-09-2006, 12:30 PM

Quote:

Originally Posted by rmuller

Yup it fits.. mine did at least.

Installation is straight-forward.. get some pb-blaster (or wd-40), soak down all the old stuff for an hour or so before you unbolt it.. and definitely have a helper lift the bumper.. it took me about 3-4 hours to do mine w/o a helper.. the worst was trying to get the old bolts out.. the next hardest was trying to balance the bumper on my leg while putting the bolts in!

You did that by yourself!!!!

Did you get a hernia?

I could just imagine the hailstorm of cuss words if that would have been me!

01-09-2006, 09:45 AM	#1 (permalink)
drum655 Moderator Join Date: May 2005 Location: Newnan, GA Posts: 955 Gallery: 0	will it fit will a new tjm bumper fit in the rear of my disco? i am driving to knoxville to get it from the distributor and i need to know if it will fit....hopefully it will __________________ Moderator of the East Coast and Discovery 2 sections! 2001 Disco II SE w/CDL ~Equipe 4x4 Winch Bumper ~Custom steel rear bumper ~Equipe 4x4 steering skid and radiator skid ~RTE rocksliders ~QT services front and rear diff guards ~2" RTE lift ~265/75 r16 Federal Couragia MTs ~Superwinch X9 ~Safety Devices Roof Rack

01-09-2006, 12:08 PM	#5 (permalink)
drum655 Moderator Join Date: May 2005 Location: Newnan, GA Posts: 955 Gallery: 0	AWESOME>>>> you guys wish me the best of luck...i hope the install is easy...it should be i am assuming __________________ Moderator of the East Coast and Discovery 2 sections! 2001 Disco II SE w/CDL ~Equipe 4x4 Winch Bumper ~Custom steel rear bumper ~Equipe 4x4 steering skid and radiator skid ~RTE rocksliders ~QT services front and rear diff guards ~2" RTE lift ~265/75 r16 Federal Couragia MTs ~Superwinch X9 ~Safety Devices Roof Rack

01-09-2006, 12:19 PM	#7 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,416 Gallery: 0	Yup it fits.. mine did at least. Installation is straight-forward.. get some pb-blaster (or wd-40), soak down all the old stuff for an hour or so before you unbolt it.. and definitely have a helper lift the bumper.. it took me about 3-4 hours to do mine w/o a helper.. the worst was trying to get the old bolts out.. the next hardest was trying to balance the bumper on my leg while putting the bolts in! __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

01-09-2006, 10:31 AM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,483 Gallery: 0	If TJM say's it will fit it will, they do quality work. Are you going to be doing alot of wheeling, if si consider the MT's instead of the AT's, much better tire off the road and an equal on the road. Mike J.

01-09-2006, 10:57 AM	#3 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,483 Gallery: 0	Or do you mean will it fit in the inside of your Truck??? Yes it should. Mike J.

01-09-2006, 12:04 PM	#4 (permalink)
Badger1 Forward! Join Date: Jul 2005 Location: Loo-eee-ville, KY Posts: 2,154 Gallery: 1	Picked up a used ARB bumper from a guy in guess where......Knoxville! The bumper just fit, and we brought our dog too so you should be fine. Bring some old blankets so it won't bang/scratch up your interior.

01-09-2006, 12:14 PM	#6 (permalink)
Badger1 Forward! Join Date: Jul 2005 Location: Loo-eee-ville, KY Posts: 2,154 Gallery: 1	The hardest part of the install is getting the bumper on the truck! Have a helper lined up when you want to install and some of the stock bolts might be a little tight. No biggy, took my wife and myself maybe an houf and a half start to finish. Real straight forward. Good luck!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)