High gears won't engage - Land Rovers Only

randydief · 03-28-2006, 03:04 PM

Hey Guys,

Took my '63 SIIA out today and it would only work in the low gears. I tried pushing the transfer lever (red knob) forward, but high gears wouldn't engage. The gearbox behaved like it was it was in neutral.

I already removed the floor and rubber boot because I thought it might be restricting the movement of the lever, but it didn't help.

Any idea what is wrong or where I should start my troubleshooting?

Thanks,

Randy

randydief · 03-29-2006, 03:23 PM

Figured out the problem, lever needed a little adjustment...everything works perfectly now...Wahooo!!!

03-28-2006, 03:04 PM	#1 (permalink)
randydief Member Join Date: Jan 2006 Posts: 4 Gallery: 0	High gears won't engage Hey Guys, Took my '63 SIIA out today and it would only work in the low gears. I tried pushing the transfer lever (red knob) forward, but high gears wouldn't engage. The gearbox behaved like it was it was in neutral. I already removed the floor and rubber boot because I thought it might be restricting the movement of the lever, but it didn't help. Any idea what is wrong or where I should start my troubleshooting? Thanks, Randy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

03-29-2006, 03:23 PM	#2 (permalink)
randydief Member Join Date: Jan 2006 Posts: 4 Gallery: 0	Figured out the problem, lever needed a little adjustment...everything works perfectly now...Wahooo!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)