Series 3 clutch

[g7jtk]

The clutch doesn't work on my lightweight. There is no resistance at the pedaland has lost fluid, I have refilled with fluid and everthing seemed ok but when I went touse it yesterday no clutch or fluid. Obviously there is a leak. The question is where is the leak likley to be? There are no extra drops underneath and it is raining hard so nothing would show anyway.

[Snagger]

Master cylinder leaks tend to make themselves known with fluid dribbling down the pedal onto the floor. A slave cylinder leak will have dumped fluid into the bell housing, and having lost 2 systems' worth, you may have an indication from the bell housing drain hole. A leak from the pipe work may show itself by degreasing (and eventually paint stripping) an adjacent patch of the bulkhead.

[g7jtk]

New slave unit fitted and fresh fluid so we are on the road again.