What wiring harness will I need? - Land Rovers Only

Crankin · 07-28-2008, 08:01 AM

I am in the process of beginning a frame swap on a 1972 SIII 88". Since I am going through all this, I figure it will be a good time to redo the wiring. The current wiring has been spliced, cut, shortened, old, dried, added into, etc...

Looking at the wiring harnesses available through rovers north, I noticed that there seems to be a few selections. What assembly do I need to purchase?

Has anyone found anything better (in the ways of wiring harnesses) then rovers north that you would suggest?

jimfoo · 07-28-2008, 08:24 AM

When you call, they will help you with exactly what you need as they are very knowledgeable about their products. Although I don't know if they are better, British Wiring also has harnesses.

TerryS · 07-28-2008, 09:07 AM

I'm pretty sure the ones RN sells are made by British Wiring.
The PVC with PVC tape wrapping is all you need, and is correct for a series 3. They stopped using cotton covered before that.
It's a pretty straightforward job in a 2A, but I've never done one in a 3.

07-28-2008, 08:01 AM	#1 (permalink)
Crankin Member Join Date: Oct 2007 Posts: 11 Gallery: 0	What wiring harness will I need? I am in the process of beginning a frame swap on a 1972 SIII 88". Since I am going through all this, I figure it will be a good time to redo the wiring. The current wiring has been spliced, cut, shortened, old, dried, added into, etc... Looking at the wiring harnesses available through rovers north, I noticed that there seems to be a few selections. What assembly do I need to purchase? Has anyone found anything better (in the ways of wiring harnesses) then rovers north that you would suggest?

07-28-2008, 08:24 AM	#2 (permalink)
jimfoo jimfoo Join Date: Mar 2007 Location: Colorado Posts: 464 Gallery: 9	When you call, they will help you with exactly what you need as they are very knowledgeable about their products. Although I don't know if they are better, British Wiring also has harnesses. __________________ Jim Hall “That man has no respect for his Rover and beats the hell out of it every opportunity he gets, taking the most difficult line over each and every obstacle.” Michael 1966 88" 1.9l VW TDI, GT1749V, IC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wiring harness differences between 88 89 and 90	rezdiver	Range Rover Classic	0	01-17-2007 02:24 PM
Ipf H4 Wiring Harness	DevilDisco	Discovery Series II	1	09-19-2006 08:06 AM
Engine wiring harness	apbtpetey	Land Rover Parts and Vehicles Wanted	6	02-02-2006 10:09 AM
Wiring harness and oil in the computer?	rookshark	Defender	2	01-18-2006 06:15 PM
Installing Aftermarket CarStereo into Discovery: Where Can I Find the Wiring Harness?	Adam in NYC USA	Discovery Series I	17	01-06-2005 12:07 PM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

07-28-2008, 09:07 AM	#3 (permalink)
TerryS Moderator Join Date: Aug 2004 Location: Bloomfield, CT If I died today, I lived there all my life. Posts: 2,236 Gallery: 0	I'm pretty sure the ones RN sells are made by British Wiring. The PVC with PVC tape wrapping is all you need, and is correct for a series 3. They stopped using cotton covered before that. It's a pretty straightforward job in a 2A, but I've never done one in a 3.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)