'92 Rover County Keyless question - Land Rovers Only

crux3 · 12-28-2005, 12:50 PM

Hello all.

I am new to this forum and I thought I'd post a question about my '92 Rover County Keyless Entry problem. Thanks in advance for any input.

Put plainly, the keyless system does not work and I want to find out where I should start. The little light on the fob lights up when I push it but the security/locks do not activate. Any suggestions on where I should start? The fuses look fine. Thanks!

Christian on Vashon Island

Roverranger · 01-04-2006, 08:16 AM

Hey, I'm no security expert or even novice, but I've heard people talking about reprogramming their fob to match the rover, I guess you could try that and see if maybe the code was lost or something, this is the link with the directions from a previous post here:

95 LWB Programming Remote... Help!

good luck...

Mike

campbell · 12-26-2006, 04:11 PM

Hi,

I just aquired a 95 and mine does the same thing.
I have read about re programming the key fobs, and having someone hold in the detent switch under the hood, and cycling the ignition switch and stuff, but i dont know if it is a "programming" problem. The other problem that I have is the ability to lock all the doors on my Rover has been stripped from me. Maybe these problems are common with each other. I dont know?

OkieRover · 12-27-2006, 06:21 AM

Open the remote and make sure the security chip is still in the connection.
ON occasion I drop mine and the chip comes out. Just slip it back in and see what happens.

12-28-2005, 12:50 PM	#1 (permalink)
crux3 Member Join Date: Dec 2005 Posts: 1 Gallery: 0	'92 Rover County Keyless question Hello all. I am new to this forum and I thought I'd post a question about my '92 Rover County Keyless Entry problem. Thanks in advance for any input. Put plainly, the keyless system does not work and I want to find out where I should start. The little light on the fob lights up when I push it but the security/locks do not activate. Any suggestions on where I should start? The fuses look fine. Thanks! Christian on Vashon Island

01-04-2006, 08:16 AM	#2 (permalink)
Roverranger Member Join Date: May 2005 Location: New Hampton, NH Posts: 21 Gallery: 0	Hey, I'm no security expert or even novice, but I've heard people talking about reprogramming their fob to match the rover, I guess you could try that and see if maybe the code was lost or something, this is the link with the directions from a previous post here: 95 LWB Programming Remote... Help! good luck... Mike __________________ 1995 P38A 4.0 Former.. '92 Rangie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

12-26-2006, 04:11 PM	#3 (permalink)
campbell Senior Member Join Date: Dec 2006 Posts: 126 Gallery: 0	Hi, I just aquired a 95 and mine does the same thing. I have read about re programming the key fobs, and having someone hold in the detent switch under the hood, and cycling the ignition switch and stuff, but i dont know if it is a "programming" problem. The other problem that I have is the ability to lock all the doors on my Rover has been stripped from me. Maybe these problems are common with each other. I dont know?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)