ABS pump noise/bleeding - Land Rovers Only

mdvickst · 02-16-2007, 04:25 PM

I just installed a new ABS pump and relays. The accumulator was replced before that because i originally thought that was the problem. Now the pump stays on and makes a weird noise. It gets louder at times then gets softer. It sounds like there is air inside. How do i bleed the abs pump and or the master cylinder. I bled the brake on the wheels but im ont sure if i did them correctly. Should I just keep bleeding the brakes untill the noise stops? Any help would be appreciated.

-Mark

sven · 02-16-2007, 04:54 PM

Brake Problems 95 RR 4.2 V-8

02-16-2007, 04:25 PM	#1 (permalink)
mdvickst Member Join Date: Feb 2007 Posts: 26 Gallery: 0	ABS pump noise/bleeding I just installed a new ABS pump and relays. The accumulator was replced before that because i originally thought that was the problem. Now the pump stays on and makes a weird noise. It gets louder at times then gets softer. It sounds like there is air inside. How do i bleed the abs pump and or the master cylinder. I bled the brake on the wheels but im ont sure if i did them correctly. Should I just keep bleeding the brakes untill the noise stops? Any help would be appreciated. -Mark

02-16-2007, 04:54 PM	#2 (permalink)
sven Senior Member Join Date: May 2005 Location: Centre of PA Posts: 373 Gallery: 0	Brake Problems 95 RR 4.2 V-8 __________________ 99 D1 73 Series SWB 95 RRC LWB - Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)