AC Conversion - Land Rovers Only

ChamplainRover · 03-03-2008, 12:10 PM

Anyone done the air conditioning conversion to R134?

Buy the kit (O-ring, oil, etc.) from Atlantic British for $120 or is there a cheaper route to go? Is the conversion easy to do or best left to a shop?

Thanks,

ChamplainRover

atvsmurf · 03-03-2008, 02:49 PM

most any auto parts store will have the o-rings, when you open your system, just pull the old ones off and take them with you, and get the proper type in the sizes you have, just remeber where they go(shouldn't be hard)...the conversion isn't hard, provided you know how to do a/c and have the guages, tools, scales...

ChamplainRover · 03-04-2008, 11:36 AM

Thanks, ATV.

What about dryer? Can I get one from an autoparts store? In other words, what other than O-rings do I need and can I get them for cheaper than Atlantic British, where the whole conversion kit is about $120?

My goal would be to do the mechanical part of the conversion myself, then have a shop do the flush, oil, gas parts.

Thanks,

ChamplainRover

Elemental · 03-04-2008, 11:50 AM

I have a new one sitting here doign nothing. Whats it worth to you? I'll never use it.Make a offer

ChamplainRover · 03-04-2008, 12:11 PM

Elemental,

E-mail me at chopkins@thehill.org

Thanks,

ChamplainRover

ChamplainRover · 03-04-2008, 06:00 PM

Elemental,

Give me a holler at the above email address, or let me know how else I can get in touch with you to dicuss your conversion kit.

Thanks,

ChamplainRover (chopkins@thehill.org)

Elemental · 04-15-2008, 08:34 AM

$HIT! I am so sorry, this slipped past me. DO you still need one? I sent you a email.

03-03-2008, 12:10 PM	#1 (permalink)
ChamplainRover ChamplianRover Join Date: Jun 2007 Location: PA Posts: 49 Gallery: 0	AC Conversion Anyone done the air conditioning conversion to R134? Buy the kit (O-ring, oil, etc.) from Atlantic British for $120 or is there a cheaper route to go? Is the conversion easy to do or best left to a shop? Thanks, ChamplainRover

03-04-2008, 11:50 AM	#4 (permalink)
Elemental Senior Member Join Date: Feb 2007 Posts: 3,152 Gallery: 0	I have a new one sitting here doign nothing. Whats it worth to you? I'll never use it.Make a offer __________________ I only worry about myself, screw the others.

04-15-2008, 08:34 AM	#7 (permalink)
Elemental Senior Member Join Date: Feb 2007 Posts: 3,152 Gallery: 0	$HIT! I am so sorry, this slipped past me. DO you still need one? I sent you a email. __________________ I only worry about myself, screw the others.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Isuzu Diesel conversion - new Torque Converter?	adcomp	Hybrid	0	12-13-2007 07:42 PM
Chevy V8 conversion: help needed	friday	General Land Rover Discussion	13	08-26-2007 06:44 AM
Help with a spring conversion on a 98 RR	Rskgada	Range Rover P38, Mk III and Range Rover Sport	1	02-08-2006 10:21 AM
D90 Hybred, Turbo Deisel Conversion, Automatic, Many Upgrades	cmprobert	Land Rover Vehicles	0	06-10-2005 08:45 AM
Gas conversion on a 300tdi	macdon2000	General Land Rover Discussion	2	04-09-2005 10:28 AM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

03-03-2008, 02:49 PM	#2 (permalink)
atvsmurf Senior Member Join Date: Sep 2007 Location: pikeville, ky Posts: 160 Gallery: 0	most any auto parts store will have the o-rings, when you open your system, just pull the old ones off and take them with you, and get the proper type in the sizes you have, just remeber where they go(shouldn't be hard)...the conversion isn't hard, provided you know how to do a/c and have the guages, tools, scales...

03-04-2008, 11:36 AM	#3 (permalink)
ChamplainRover ChamplianRover Join Date: Jun 2007 Location: PA Posts: 49 Gallery: 0	Thanks, ATV. What about dryer? Can I get one from an autoparts store? In other words, what other than O-rings do I need and can I get them for cheaper than Atlantic British, where the whole conversion kit is about $120? My goal would be to do the mechanical part of the conversion myself, then have a shop do the flush, oil, gas parts. Thanks, ChamplainRover

03-04-2008, 12:11 PM	#5 (permalink)
ChamplainRover ChamplianRover Join Date: Jun 2007 Location: PA Posts: 49 Gallery: 0	Elemental, E-mail me at chopkins@thehill.org Thanks, ChamplainRover

03-04-2008, 06:00 PM	#6 (permalink)
ChamplainRover ChamplianRover Join Date: Jun 2007 Location: PA Posts: 49 Gallery: 0	Elemental, Give me a holler at the above email address, or let me know how else I can get in touch with you to dicuss your conversion kit. Thanks, ChamplainRover (chopkins@thehill.org)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)