|
|
|
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
 |
|
|
LinkBack | Thread Tools | Display Modes |
12-05-2006, 12:22 PM
|
#1 (permalink) |
|
Crazy about Rovers and more...
 
Join Date: Dec 2005
Location: Westland, MI
Posts: 2,889
Gallery:
0
|
Borg Warner T-Case Refill...
Hey Oscar, hopefully you found this thread, here is a pic of what you need to do to renew the ATF in your BW T-Case.
Remove the Fill hole first, and then remove the drain plug last, and let all the old ATF drain out. Then put the drain plug back in and start filling the T-Case with new ATF til' the level in the T-Case reaches the Fill plug level, reinstall the fill plug and then you are good to go. Hope that helps!
__________________
Pat Albaugh, Midwest Moderator "Diffage" -the point at which the truck's differential makes contact with the ground. http://www.cardomain.com/id/RageRover42Visit my RRC and others here!(updated as of September 15, 2006) 1995 RRC LWB -LT265/75R16 Pathfinder All Terrains -RTE 2" Lift Springs -Pro Comp ES9000 Shocks (from DAP Enterprises) -KMC Front Diff Guard -4 Desert Fox 55 watt Lighting -Radio Shack CB Radio (never know when signal fails on a cell phone) -2 Halogen Super Sport 100 watt forward lights -Custom slim style front bumper w/ integrated bull bar -Lowe's Special "Homemade" Snorkel -T-Case out of an 92' RRC |
|
|
| Sponsored Links | |
Advertisement |
|
Linear Mode
