center console wood trim piece - Page 2 - Land Rovers Only

james.carsner · 02-24-2005, 12:12 AM

Missed this thread initially, I will definately be doing the CF route now on my '90 County. I really don't care for the Burl wood anyways.

AdrianL · 02-25-2005, 11:11 AM

I got the wood peice from salvage yard. Not Cheap!! $150!!
Anyway, it is in much better shape than mine with no lifting, warping and big cracks. Minor hairline cracks by window switch but I can live with that.
Now I am going to refinish mine and if it turns out better than what I have, I will replace back and sell the ones I got. Anybody interested?

J_G_Dare · 07-12-2005, 04:26 AM

I am in Australia. Have same problem with this part in 95 "Soft dash" Classic. I saw somewhere a guy called Joe Mendina (have misplaced his details) in the USA, and he refinishes these R/Rover console (and I guess other wood pcs.) to PERFECTION. I will try to locate his e'mail address and post it here. Prices were fair from memory.

sven · 07-12-2005, 07:13 AM

I have a 95 center piece on good condition. I'll sell it for a lot less than $150

J_G_Dare · 07-12-2005, 05:02 PM

My apologies for perhaps stating the obvious but remember LHD and RHD of this part are different as they are not symetrical etc.

02-24-2005, 12:12 AM	#16 (permalink)
james.carsner Member Join Date: Jan 2005 Location: Puget Sound Basin Posts: 29 Gallery: 0	Missed this thread initially, I will definately be doing the CF route now on my '90 County. I really don't care for the Burl wood anyways. __________________ James '90 County (x2) - others in the corral: '74 BMW 2002tii '86 BMW 735i (FS Soon) '03 VW Passat Wagen

02-25-2005, 11:11 AM	#17 (permalink)
AdrianL Senior Member Join Date: Jan 2005 Location: Crystal MN Posts: 162 Gallery: 0	Got the used but great shape wood piece I got the wood peice from salvage yard. Not Cheap!! $150!! Anyway, it is in much better shape than mine with no lifting, warping and big cracks. Minor hairline cracks by window switch but I can live with that. Now I am going to refinish mine and if it turns out better than what I have, I will replace back and sell the ones I got. Anybody interested?

07-12-2005, 04:26 AM	#18 (permalink)
J_G_Dare Member Join Date: Jul 2005 Posts: 16 Gallery: 0	Refinish of Console wood I am in Australia. Have same problem with this part in 95 "Soft dash" Classic. I saw somewhere a guy called Joe Mendina (have misplaced his details) in the USA, and he refinishes these R/Rover console (and I guess other wood pcs.) to PERFECTION. I will try to locate his e'mail address and post it here. Prices were fair from memory.

07-12-2005, 05:02 PM	#20 (permalink)
J_G_Dare Member Join Date: Jul 2005 Posts: 16 Gallery: 0	Wood console piece ("soft dash") version My apologies for perhaps stating the obvious but remember LHD and RHD of this part are different as they are not symetrical etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

07-12-2005, 07:13 AM	#19 (permalink)
sven Senior Member Join Date: May 2005 Location: Centre of PA Posts: 373 Gallery: 0	I have a 95 center piece on good condition. I'll sell it for a lot less than $150

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)