CV joint failure? - Land Rovers Only

Mark HH · 06-15-2006, 09:27 AM

Hi All,

If you've read this thread in another forum - my apologies - I want as much knowledge as I can get...

What are the symptoms of a CV joint failing?

Many thanks,

Mark HH

01001010 · 06-15-2006, 09:49 AM

since i know you've got a D1...check your swivel ball. A dry CV could eventually become a damaged CV. You'll hear a clunking sound as you turn. This. A damage CV means the race that holds the bearing-like balls in place has cracked. I ran mine dry for a few months and the race eventually started to crack. check here for the replacement process...

CV Joint Replacement for Dummies...

OkieRover · 06-15-2006, 10:29 AM

It's a lovely crunching sound.
www.okierover.com/cv-joint.htm

Mark HH · 06-15-2006, 11:03 AM

Hi 0100,

I've had, one way or another a miserable week with my truck...

All the noises! Wednesday I swapped the front propshaft and all seems to be well - then today I get the dull metalic "click-thunk" from the drivers wheel when I turn hard to the drivers side - I guess I had two problems at the same time!

I'm going to buy the new stub axle and beaing in the morning, along with axle stands, torque wrench and of coures the hub spanner (and 1 000 001 other bits I'll need) hopefully by the end of the day I'll have her fine again...

..until next time - but hey! I'll have the tools!

Cheers, Mark HH

Hi Okie - I'll check your link...

06-15-2006, 09:27 AM	#1 (permalink)
Mark HH Member Join Date: Nov 2005 Location: Cambs UK Posts: 60 Gallery: 0	CV joint failure? Hi All, If you've read this thread in another forum - my apologies - I want as much knowledge as I can get... What are the symptoms of a CV joint failing? Many thanks, Mark HH

06-15-2006, 09:49 AM	#2 (permalink)
01001010 Moderator Join Date: Jan 2005 Location: Lawrenceville, GA Posts: 4,542 Gallery: 15	since i know you've got a D1...check your swivel ball. A dry CV could eventually become a damaged CV. You'll hear a clunking sound as you turn. This. A damage CV means the race that holds the bearing-like balls in place has cracked. I ran mine dry for a few months and the race eventually started to crack. check here for the replacement process... CV Joint Replacement for Dummies... __________________ JC... 1996 Discovery SE - The Blue Marlin - gone =( 1965 Series IIa 109 RHD 2.25L Dsl - Wilks 1965 Series IIa 88' LHD 2.25L Petrol - Fionna

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

06-15-2006, 11:03 AM	#4 (permalink)
Mark HH Member Join Date: Nov 2005 Location: Cambs UK Posts: 60 Gallery: 0	Hi 0100, I've had, one way or another a miserable week with my truck... All the noises! Wednesday I swapped the front propshaft and all seems to be well - then today I get the dull metalic "click-thunk" from the drivers wheel when I turn hard to the drivers side - I guess I had two problems at the same time! I'm going to buy the new stub axle and beaing in the morning, along with axle stands, torque wrench and of coures the hub spanner (and 1 000 001 other bits I'll need) hopefully by the end of the day I'll have her fine again... ..until next time - but hey! I'll have the tools! Cheers, Mark HH Hi Okie - I'll check your link...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)