D90 style steering damper and steering skid guards - Land Rovers Only

siam · 03-02-2006, 06:04 PM

anyone relocated the steering damper up front and put a steering skid plate as well.. was wondering if there was a clearance issue between the skid plate and the damper? thanks in advance...

Bene · 03-02-2006, 11:58 PM

i woudln't think so, but i would be safe and call whoever made the skidplate to be sure.

Geobloke · 03-03-2006, 05:26 AM

Quote:

Originally Posted by siam

anyone relocated the steering damper up front and put a steering skid plate as well.. was wondering if there was a clearance issue between the skid plate and the damper? thanks in advance...

I haven't seen it on RRCs but have on Discos, works well apparently!

Nomar · 03-03-2006, 05:31 AM

check http://www.rovertym.com/steering.htm

I have the RTE damper relocator on my '91 RR

John C · 03-03-2006, 06:08 AM

Quote:

Originally Posted by siam

anyone relocated the steering damper up front and put a steering skid plate as well.. was wondering if there was a clearance issue between the skid plate and the damper? thanks in advance...

Our skidplate does not interfere with the steering damper relocation kit at all.

jeffreydv · 03-03-2006, 04:04 PM

I have a skid plate and heavy duty steering rods from DAP. I have no interference problems with the relocated steering damper.

siam · 03-03-2006, 06:07 PM

Quote:

Originally Posted by jeffreydv

I have a skid plate and heavy duty steering rods from DAP. I have no interference problems with the relocated steering damper.

Nice ! so jeffreydv you mean to say you have the damper up front and a DAP skid plate and it works fine? I already have the damper up front but just wanting to add on the very same skid plate from DAP.. ya wouldn't happen to have photos would you? thanks for the reply...

siam · 03-03-2006, 06:18 PM

Quote:

Originally Posted by Nomar

check http://www.rovertym.com/steering.htm

I have the RTE damper relocator on my '91 RR

Nomar, I have the very same damper relocator setup on my RRC.. I was just afraid that where the damper bolts on would get in the way of where the skids would bolt on.. hmmmmm

siam · 03-13-2006, 05:09 PM

i guess the answer is yes it fits.. i bit the bullet and bought one.. ya i know it's too clean need to get iit dirty..

03-02-2006, 06:04 PM	#1 (permalink)
siam 100 quids for a days work son.. Join Date: Aug 2004 Location: Alameda Island Posts: 238 Gallery: 0	D90 style steering damper and steering skid guards anyone relocated the steering damper up front and put a steering skid plate as well.. was wondering if there was a clearance issue between the skid plate and the damper? thanks in advance... __________________ SupermotoUSA 917 www.DiceRacing.com RRC beast sold Disco 95 5 on the floor

03-02-2006, 11:58 PM	#2 (permalink)
Bene Magicly Delicious Join Date: Nov 2005 Location: Phoenix, AZ Posts: 1,030 Gallery: 0	i woudln't think so, but i would be safe and call whoever made the skidplate to be sure. __________________ Kevin Owning a Land Rover is like dating a super model. Sure she has expenive tastes, complains a lot, and requires constant attention... but damn... 1994 Discovery

03-03-2006, 05:31 AM	#4 (permalink)
Nomar Senior Member Join Date: May 2005 Location: in Virginia Posts: 260 Gallery: 0	check http://www.rovertym.com/steering.htm I have the RTE damper relocator on my '91 RR __________________ The mere fact that a flame thrower even exists is proof that sometime, somewhere, somebody said to themselves, "You know, I'd like to set those people over there on fire, but I'm just not close enough to get the job done."

03-03-2006, 04:04 PM	#6 (permalink)
jeffreydv Member Join Date: Jun 2005 Location: New Milford, NJ Posts: 44 Gallery: 0	I have a skid plate and heavy duty steering rods from DAP. I have no interference problems with the relocated steering damper. __________________ Jeff 1992 Range Rover 1994 Discovery 5 speed

03-13-2006, 05:09 PM	#9 (permalink)
siam 100 quids for a days work son.. Join Date: Aug 2004 Location: Alameda Island Posts: 238 Gallery: 0	i guess the answer is yes it fits.. i bit the bullet and bought one.. ya i know it's too clean need to get iit dirty.. Attached Thumbnails __________________ SupermotoUSA 917 www.DiceRacing.com RRC beast sold Disco 95 5 on the floor

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode