![]() |
![]() |
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Member
Join Date: Jan 2005
Location: Auberry Ca
Posts: 9
Gallery:
0
|
OK guys I just looked under an 89 I'm looking to buy and when I look at the "Ball Joints" (where the shafts enter into the wheels - the big metal 1/2 balls).
The balls look clean - but there is a whole bunch off accumulated black crud around the ball joint and the stabilizer bar etc. I'm guessing this is just an accululation of dirt held in place with some grease - and the guy han't keep the underside clean - Is this OK - Just a simple clean up and a regreaseing? Carl Joahsnsson |
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Moderator
![]() Join Date: Aug 2004
Location: Parker, Colorado
Posts: 5,706
Gallery:
0
|
Yes, you can clean the swivel joints if you want, they will get dirty again. Make sure that you have a mechanic check and replace all your fluid to prevent something happening in the near future.
Thats the swivel joints, both diffs, the t/case, the transmission, brake fluid and power steering. Mike J. |
|
|
|