GREAT source for Range Rover parts!! - Land Rovers Only

Serg · 09-24-2004, 02:06 PM

Hey guys and gals,

Just want to introduce Brian to you all. He is based out of Reno, Nevada (USA, but he ships all over the world!) He dismantles Range Rovers. At this point he is strictly doing Range Rovers. He also makes new mud flaps (I will have a full write up on this next week) and shift indicators for Range Rovers.

You can contact him on his email at: jbriankennedy@sbcglobal.net Or you can see his Ebay auctions at:

Sideye Ebay Auctions

He has some great products and I can tell you that his mud flaps are top notch, and at ONLY $35 for a set of 4 it is an unbelievable bargain. Most places charge $27.95 for EACH mud flap for RR Classics! Here is a link to an old mud lap auction he had... he always has them in stock, so you can email him and ask. Please mention you heard about him here.

Mud flaps for Range Rover Classic

Brian and I have done some business in the past and I can vouch for his credibility 100%.

Serg

azpaquin · 09-27-2004, 05:13 PM

any pics of this?

Serg · 09-27-2004, 05:36 PM

I will have a full write up next week.

Serg

hamrendan · 10-01-2004, 02:34 PM

the cool thing about Brians Flaps is that they are a couple inches shorter than the stock ones. He can even laser the LR logo onto them. You don't see that very often. I have sent him about $600.00 worth of business this year. He is very helpful in that he faxed me the ABS electronic diagrams!

jgkmmoore · 11-26-2004, 12:47 AM

Hey Ham- I need a set of fender flares just like you have.Can you tell me where I can find some of those ??
Best Regards-Jeff Moore

4x4network · 01-17-2005, 09:30 AM

He wants to be careful about putting the logo on. Land Rover hit a few guys in the UK with lawsuits a few years back for unauthorised use of their logo.
Hugh

Funrover · 10-05-2005, 03:24 PM

is there a place i can look before i contact!!! I am haveing no luck on the links

djromaric · 06-05-2007, 08:06 PM

2004, no links work, nothing on ebay.... sticky!

Bah....waste of time

Romaric

scroth01 · 04-15-2008, 10:32 PM

Hamrendan wanna share where you sourced out those fender flares?

roverclassiclwb93 · 05-13-2008, 11:26 PM

Living in Los Angeles, with my 1993 LWB Classic (94K Miles) was going well until the famous Jiffy Lube company talked me into a radiator flush and forgot to bleed the air oops, the engine blew a small hole in cylinder 3.

So now I find myself hunting down information on what time of engine to replace it with, without loosing power. My Rover mechanic today suggested hunting down a 4.6 Engine from a 2002-2004 wrecked Rover.

I would appreciate your insights into this decision and if you have any leads on an appropriate engine for the job.

ArmyRover · 05-14-2008, 05:47 AM

you might want to start your own thread on this instead of piggy backing on a 4 year old thread.

Also Private Message Paul Grant on here he probably has a motor ready to go to you and a reasonable price.

Welcome to the asylum.

09-24-2004, 02:06 PM	#1 (permalink)
Serg LRO Founder Join Date: Aug 2004 Location: Los Gatos, CA Posts: 2,002 Gallery: 0	GREAT source for Range Rover parts!! Hey guys and gals, Just want to introduce Brian to you all. He is based out of Reno, Nevada (USA, but he ships all over the world!) He dismantles Range Rovers. At this point he is strictly doing Range Rovers. He also makes new mud flaps (I will have a full write up on this next week) and shift indicators for Range Rovers. You can contact him on his email at: jbriankennedy@sbcglobal.net Or you can see his Ebay auctions at: Sideye Ebay Auctions He has some great products and I can tell you that his mud flaps are top notch, and at ONLY $35 for a set of 4 it is an unbelievable bargain. Most places charge $27.95 for EACH mud flap for RR Classics! Here is a link to an old mud lap auction he had... he always has them in stock, so you can email him and ask. Please mention you heard about him here. Mud flaps for Range Rover Classic Brian and I have done some business in the past and I can vouch for his credibility 100%. Serg __________________ Current Vehicles: 1995 Range Rover Classic LWB in Beluga Black 2005 BMW R1200GS 2004 Element Skateboard (Indy trucks, Bones Swiss, etc...) Past LR's: 1995 Range Rover LWB Classic 1997 Discovery XD 1995 Range Rover LWB Classic 1995 Range Rover LWB Classic 4.0

09-27-2004, 05:13 PM	#2 (permalink)
azpaquin Senior Member Join Date: Aug 2004 Location: new england Posts: 140 Gallery: 0	any pics of the flaps installed? any pics of this?

09-27-2004, 05:36 PM	#3 (permalink)
Serg LRO Founder Join Date: Aug 2004 Location: Los Gatos, CA Posts: 2,002 Gallery: 0	I will have a full write up next week. Serg __________________ Current Vehicles: 1995 Range Rover Classic LWB in Beluga Black 2005 BMW R1200GS 2004 Element Skateboard (Indy trucks, Bones Swiss, etc...) Past LR's: 1995 Range Rover LWB Classic 1997 Discovery XD 1995 Range Rover LWB Classic 1995 Range Rover LWB Classic 4.0

10-01-2004, 02:34 PM	#4 (permalink)
hamrendan Senior Member Join Date: Sep 2004 Location: Cottonwood CA near Redding Posts: 206 Gallery: 0	Flaps.. the cool thing about Brians Flaps is that they are a couple inches shorter than the stock ones. He can even laser the LR logo onto them. You don't see that very often. I have sent him about $600.00 worth of business this year. He is very helpful in that he faxed me the ABS electronic diagrams! __________________ Any advice given in this forum is my 2 cents, which is roughly the value of said advice! Dan Hamren 93 LWB "Dubya" AKA "The Beast"

11-26-2004, 12:47 AM	#5 (permalink)
jgkmmoore Member Join Date: Nov 2004 Posts: 1 Gallery: 0	Fender Flares Hey Ham- I need a set of fender flares just like you have.Can you tell me where I can find some of those ?? Best Regards-Jeff Moore

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

01-17-2005, 09:30 AM	#6 (permalink)
4x4network Member Join Date: Jan 2005 Location: Oxford, UK Posts: 7 Gallery: 0	He wants to be careful about putting the logo on. Land Rover hit a few guys in the UK with lawsuits a few years back for unauthorised use of their logo. Hugh

10-05-2005, 03:24 PM	#7 (permalink)
Funrover Rocky Mountain High Join Date: Sep 2005 Location: Colorado Springs Posts: 9,935 Gallery: 0	is there a place i can look before i contact!!! I am haveing no luck on the links

06-05-2007, 08:06 PM	#8 (permalink)
djromaric Member Join Date: Jan 2007 Posts: 19 Gallery: 0	2004, no links work, nothing on ebay.... sticky! Bah....waste of time Romaric __________________ '88 RRC '82 240 GD '79 Vespa '02 Vino

04-15-2008, 10:32 PM	#9 (permalink)
scroth01 Member Join Date: Apr 2008 Posts: 5 Gallery: 0	Hamrendan wanna share where you sourced out those fender flares?

05-13-2008, 11:26 PM	#10 (permalink)
roverclassiclwb93 Member Join Date: May 2008 Posts: 1 Gallery: 0	Looking for engine replacement and advise Living in Los Angeles, with my 1993 LWB Classic (94K Miles) was going well until the famous Jiffy Lube company talked me into a radiator flush and forgot to bleed the air oops, the engine blew a small hole in cylinder 3. So now I find myself hunting down information on what time of engine to replace it with, without loosing power. My Rover mechanic today suggested hunting down a 4.6 Engine from a 2002-2004 wrecked Rover. I would appreciate your insights into this decision and if you have any leads on an appropriate engine for the job.

05-14-2008, 05:47 AM	#11 (permalink)
ArmyRover Rebuilding Rover Join Date: Sep 2007 Location: NH Posts: 1,684 Gallery: 0	you might want to start your own thread on this instead of piggy backing on a 4 year old thread. Also Private Message Paul Grant on here he probably has a motor ready to go to you and a reasonable price. Welcome to the asylum. __________________ "Only two defining forces ever offered to die for you, Jesus Christ and the American G.I. One died for your soul, the other for your freedom." http://snhlr.org/ 91 Range Rover Classic 90 RRC Parts truck 94 Saab gas mileage beater

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode