I need a new catalytic converter - Land Rovers Only

CurvyRover · 11-07-2005, 03:48 PM

With all of the problems that we've had (Rover is now up and running - YEA!) we blew the right catalytic converter (makes funny rattling noise in the coverter and rough running - different than before though). So now my question is what and where is a good reputable place to get a new (and not overly priced) catalytic converter from?

Disco Mike · 11-07-2005, 04:06 PM

Try this group, I have sent alot of people here.

http://www.completeexhaust.com/produ...roducts_id=184

Good luck,
Mike J.

Funrover · 11-07-2005, 04:52 PM

Mine went out today too........ But I believe i helped it by hitting it with a rock..... I'll let you know what I find also

Rippers · 11-07-2005, 06:08 PM

Glad to hear you are up and running!

So what was it that was not making your rover run?

I have an 89 as well

and i had distributor issues when i first got it - we took off the rotor and killed the dizzy

apparently it's best to break the rotor off rather than just pull it off....

Paul Grant · 11-07-2005, 06:23 PM

I have a 1990 Range Rover that I am parting out. It has Catco cats and O2 sensors that are less than a year old welded to the down pipes. I you are interested I can separate them any way you like. Let me know if you are interested and I can send you photos. You can reach me at paulgrant@mac.com

Funrover · 11-07-2005, 06:26 PM

Quote:

Originally Posted by Paul Grant

I have a 1990 Range Rover that I am parting out. It has Catco cats and O2 sensors that are less than a year old welded to the down pipes. I you are interested I can separate them any way you like. Let me know if you are interested and I can send you photos. You can reach me at paulgrant@mac.com

How much for the driver side cat?
where are you at? what state?

Paul Grant · 11-07-2005, 08:32 PM

I'm in CT. $50 for the cat plus shipping. As I mentioned in the post above, the previous owner had the entire system welded together so I will have to cut just below the cat to remove it. So, for $50 you get the downpipe from the exhaust manifold to just below the cat. The O2 sensor is supposed to be less than a year old if you are interested in that as well.

Funrover · 11-07-2005, 08:42 PM

I don't really need one... But if it is no extra charge I'll take it....Do you know the cost of shipping? roughly

lonestarrover · 11-17-2005, 05:55 PM

You can buy a new cat from Sunmmt Racing for about $60 brand new. You just need to weld it in. CATCO Part # 6905. I bought two for my 88 RR.

RoverlessNoMore · 11-22-2006, 09:20 AM

If they haven't already sold yet I am looking for the full Y pipe with cats. If still available let me know how much with shipping to 30317.

11-07-2005, 03:48 PM	#1 (permalink)
CurvyRover Member Join Date: Aug 2005 Location: Lampasas, Texas Posts: 49 Gallery: 0	I need a new catalytic converter With all of the problems that we've had (Rover is now up and running - YEA!) we blew the right catalytic converter (makes funny rattling noise in the coverter and rough running - different than before though). So now my question is what and where is a good reputable place to get a new (and not overly priced) catalytic converter from? __________________ Stuck-N-Texas

11-07-2005, 06:08 PM	#4 (permalink)
Rippers Senior Member Join Date: Oct 2005 Location: Tampa FL Posts: 176 Gallery: 0	Glad to hear you are up and running! So what was it that was not making your rover run? I have an 89 as well and i had distributor issues when i first got it - we took off the rotor and killed the dizzy apparently it's best to break the rotor off rather than just pull it off.... __________________ 1989 RRC

11-22-2006, 09:20 AM	#10 (permalink)
RoverlessNoMore Member Join Date: Oct 2006 Posts: 1 Gallery: 0	Interested in Y Pipe with Cats If they haven't already sold yet I am looking for the full Y pipe with cats. If still available let me know how much with shipping to 30317. __________________ Roverless No More Casper 92 Range Rover Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

11-07-2005, 04:06 PM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,131 Gallery: 0	Try this group, I have sent alot of people here. http://www.completeexhaust.com/produ...roducts_id=184 Good luck, Mike J.

11-07-2005, 06:23 PM	#5 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 846 Gallery: 0	I have a 1990 Range Rover that I am parting out. It has Catco cats and O2 sensors that are less than a year old welded to the down pipes. I you are interested I can separate them any way you like. Let me know if you are interested and I can send you photos. You can reach me at paulgrant@mac.com

11-07-2005, 08:32 PM	#7 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 846 Gallery: 0	I'm in CT. $50 for the cat plus shipping. As I mentioned in the post above, the previous owner had the entire system welded together so I will have to cut just below the cat to remove it. So, for $50 you get the downpipe from the exhaust manifold to just below the cat. The O2 sensor is supposed to be less than a year old if you are interested in that as well.

11-17-2005, 05:55 PM	#9 (permalink)
lonestarrover Member Join Date: Oct 2004 Posts: 57 Gallery: 0	You can buy a new cat from Sunmmt Racing for about $60 brand new. You just need to weld it in. CATCO Part # 6905. I bought two for my 88 RR.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)