My RRC is pulling slightly left on acceleration and right on deceleration - Land Rovers Only

KJJ0506 · 03-01-2008, 02:02 PM

I have replaced the ball joints ( inc the a-arm ) , panhard bushings , trailing arm bushings and have all new shocks and springs .

I havent done the Radius arm bushings or the A-arm bushings yet.

Any idea what is causing the issue ?

p76rangie · 03-01-2008, 03:36 PM

It is bushes that cause the problem usually. Obviously it are the ones you haven't replaced yet.

KJJ0506 · 03-01-2008, 03:50 PM

Thanks for that. I guess I was unclear .... would it be the rad arm or the a-arm ?

XtremeMarine · 03-01-2008, 05:39 PM

I would lean more towards the radius arms considering the diagnosis, but it could be a combo.

p76rangie · 03-01-2008, 07:04 PM

It can be any of the bushes at either end of the trailing arms or the rear A frame. Could also be the panhard rod bushes, but less likely. I am not aware of any other bushes. So back to my original statement, it will be one of the bushes that you have not replaced. Can't be more definitive without physically checking out each bush myself.

Don · 03-02-2008, 07:15 AM

I would replace them all

03-01-2008, 02:02 PM	#1 (permalink)
KJJ0506 Member Join Date: Aug 2007 Location: Portland , Oregon Posts: 7 Gallery: 5	My RRC is pulling slightly left on acceleration and right on deceleration I have replaced the ball joints ( inc the a-arm ) , panhard bushings , trailing arm bushings and have all new shocks and springs . I havent done the Radius arm bushings or the A-arm bushings yet. Any idea what is causing the issue ? __________________ Ken Jeffers Portland , Oregon 90 RRC - 95 4.2 swap OME Medium's , Pro-Comp ES9000HD's 1.25" Spacers , Dick Cepek FC-II's , Powermaster 130a Alt , Electric Fan swap , Inline Fuel Pump swap

03-01-2008, 03:50 PM	#3 (permalink)
KJJ0506 Member Join Date: Aug 2007 Location: Portland , Oregon Posts: 7 Gallery: 5	Thanks for that. I guess I was unclear .... would it be the rad arm or the a-arm ? __________________ Ken Jeffers Portland , Oregon 90 RRC - 95 4.2 swap OME Medium's , Pro-Comp ES9000HD's 1.25" Spacers , Dick Cepek FC-II's , Powermaster 130a Alt , Electric Fan swap , Inline Fuel Pump swap

03-01-2008, 05:39 PM	#4 (permalink)
XtremeMarine Senior Member Join Date: May 2007 Posts: 1,404 Gallery: 0	I would lean more towards the radius arms considering the diagnosis, but it could be a combo. __________________ "In certain places, at certain hours, gazing at the sea is dangerous. It is what looking at a woman sometimes is." - Victor Hugo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

03-01-2008, 03:36 PM	#2 (permalink)
p76rangie Ian Matthews Join Date: Jan 2006 Location: Melbourne Australia Posts: 1,959 Gallery: 0	It is bushes that cause the problem usually. Obviously it are the ones you haven't replaced yet.

03-01-2008, 07:04 PM	#5 (permalink)
p76rangie Ian Matthews Join Date: Jan 2006 Location: Melbourne Australia Posts: 1,959 Gallery: 0	It can be any of the bushes at either end of the trailing arms or the rear A frame. Could also be the panhard rod bushes, but less likely. I am not aware of any other bushes. So back to my original statement, it will be one of the bushes that you have not replaced. Can't be more definitive without physically checking out each bush myself.

03-02-2008, 07:15 AM	#6 (permalink)
Don Member Join Date: Aug 2004 Location: Rhode Island US Posts: 5 Gallery: 0	I would replace them all

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)