p38 oil leak - Land Rovers Only

roverbryan08 · 04-20-2008, 06:41 PM

I have oil leak, only while engine is running, it drips down the oil filter? Im using a fram oil filter and its turned as far as it'll go? Do i have to use a LR filter? or is there a bigger problem?

BullDogSix · 04-20-2008, 06:58 PM

Ditch that FRAM filter as fast as you can...they have no anti-drainback feature and allow your motor to start with the top side "dry". VERRRRRY BAD!!

Go to your local NAPA store and get a NAPA GOLD filter (they are made by WIX...and are very good) and are only about $8-$10. I think its a #1068 for your RR...but you will want to check with the guy behind the counter.

Also, check to make sure your PVC valve is not blocked and causing your engine to pressurize and pump the oil out the path of least resistance...I've seen it happen (to a non Rover...but still a GM engine)

roverbryan08 · 04-21-2008, 01:22 PM

replaced the oil filter....didnt work, so PVC valve next. also, my oil is slightly high i believe, could this be causing it as well?

MysteryTheatre · 04-21-2008, 01:58 PM

Just a thought... on mine there is a plug (just like the oil sump drain plug above the filter)
on the filter housing... it has a copper crush washer. 1 1/8" should tighten it up...if its dripping it could make the filter appear to be leaking.

04-20-2008, 06:41 PM	#1 (permalink)
roverbryan08 1998 Range Rover Join Date: Feb 2008 Location: Harrisburg PA Posts: 9 Gallery: 0	p38 oil leak I have oil leak, only while engine is running, it drips down the oil filter? Im using a fram oil filter and its turned as far as it'll go? Do i have to use a LR filter? or is there a bigger problem?

04-20-2008, 06:58 PM	#2 (permalink)
BullDogSix RRC Owner in training Join Date: Jan 2008 Location: NW Lower Michigan Posts: 189 Gallery: 2	Ditch that FRAM filter as fast as you can...they have no anti-drainback feature and allow your motor to start with the top side "dry". VERRRRRY BAD!! Go to your local NAPA store and get a NAPA GOLD filter (they are made by WIX...and are very good) and are only about $8-$10. I think its a #1068 for your RR...but you will want to check with the guy behind the counter. Also, check to make sure your PVC valve is not blocked and causing your engine to pressurize and pump the oil out the path of least resistance...I've seen it happen (to a non Rover...but still a GM engine) __________________ Support the Troops = Support the Mission Don't say it if you don't mean it. 1994 RRC LWB, 82k miles, 4.2, Cornish Cream/Lightstone Interior, spring converted.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Range rover P38 weird Oil leak problem	pat3d	Range Rover P38, Mk III and Range Rover Sport	12	04-26-2008 06:56 AM
Cylinder#6 Misfire & Coolant Leak	tskim2024	Discovery Series II	3	02-09-2008 09:07 AM
What's up with that rover oil leak thing???	Steph	Discovery Series II	16	09-02-2007 10:37 PM
craziness with the exhaust leak	ealex	Discovery Series II	4	05-18-2007 06:41 AM
Common coolant/oil leak area?	6cuda6	Discovery Series II	3	04-22-2007 01:09 PM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-21-2008, 01:22 PM	#3 (permalink)
roverbryan08 1998 Range Rover Join Date: Feb 2008 Location: Harrisburg PA Posts: 9 Gallery: 0	replaced the oil filter....didnt work, so PVC valve next. also, my oil is slightly high i believe, could this be causing it as well?

04-21-2008, 01:58 PM	#4 (permalink)
MysteryTheatre 1989 county 3.9 Join Date: Nov 2007 Posts: 109 Gallery: 0	Just a thought... on mine there is a plug (just like the oil sump drain plug above the filter) on the filter housing... it has a copper crush washer. 1 1/8" should tighten it up...if its dripping it could make the filter appear to be leaking.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)