Power Window Issue

[Roving Westward]

Here's one for you... the rear passenger window of my 95 LWB has a problem; after it is rolled down, it will not roll up. Seems that a small plastic piece that fits on the end of the lifting arm and into the lateral groove of the window cradle keeps poping off the arm. Anybody know why?

[PTSchram]

Originally Posted by Roving Westward

Anybody know why?

Poor design? You need a new window regulator, or if you're handy, make a new part.

[scoobymick]

Originally Posted by Roving Westward

Here's one for you... the rear passenger window of my 95 LWB has a problem; after it is rolled down, it will not roll up. Seems that a small plastic piece that fits on the end of the lifting arm and into the lateral groove of the window cradle keeps poping off the arm. Anybody know why?

Hi,
There should be a 'u' clip to secure it where the ball pops on,if it's there it sounds like the plastic clip is broken
Mick

[Chet]

I agree with the others - if you're not handy, you need a new actuator. And I do think its a poor design. I'v replaced all four of mine in the past 3 years for the same reason.