Rear axles - Land Rovers Only

ArmyRover · 04-21-2008, 06:41 AM

So last night I head into the garage to grab a few things for the wife and I drop a roll of paper towels. They roll over against the rear wheel of the parts RRC. As a lean down to grab them through the open center of the rim I notice that the axle cover is missing and I can see the end of the shaft. I start to stand up when it dawns on me that there seem to be more than 10 splines on this end of the axle. I count them and end up with 24 (yes I did have to take my shoes off and unzip my fly to count that high).

So the question is would that be evidence of a 24 spline set up? I 95% sure I know the answer I just want to confirm it before I do the happy dance!

Paul Grant · 04-21-2008, 04:12 PM

So what you are saying is that the drive member was off the rear wheel and you could see the outer end of the rear axle, correct? All the ABS equipped RRC's had 24 splines at the drive members. It's the inner spline count that matters when you're figuring out what diffs you have. My bet is you have 10 splines at the diff. I have never seen a 24 spline rear (at the diff) with removable drive members. Every 24 spline rear axle I have ever seen from the factory was a one piece deal with the drive member permanently attached to the half shaft.

ArmyRover · 04-21-2008, 04:16 PM

damn you ruined my happy dance Paul.....

p76rangie · 04-21-2008, 04:20 PM

If the drive flange has been removed, the axle should just come straight out. So you can pull it out and have a look.

After market axles have drive flanges on 24 spline axles.

04-21-2008, 06:41 AM	#1 (permalink)
ArmyRover Rebuilding Rover Join Date: Sep 2007 Location: NH Posts: 1,730 Gallery: 0	Rear axles So last night I head into the garage to grab a few things for the wife and I drop a roll of paper towels. They roll over against the rear wheel of the parts RRC. As a lean down to grab them through the open center of the rim I notice that the axle cover is missing and I can see the end of the shaft. I start to stand up when it dawns on me that there seem to be more than 10 splines on this end of the axle. I count them and end up with 24 (yes I did have to take my shoes off and unzip my fly to count that high). So the question is would that be evidence of a 24 spline set up? I 95% sure I know the answer I just want to confirm it before I do the happy dance! __________________ "Only two defining forces ever offered to die for you, Jesus Christ and the American G.I. One died for your soul, the other for your freedom." http://snhlr.org/ 91 Range Rover Classic 90 RRC Parts truck 94 Saab gas mileage beater

04-21-2008, 04:12 PM	#2 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 846 Gallery: 0	So what you are saying is that the drive member was off the rear wheel and you could see the outer end of the rear axle, correct? All the ABS equipped RRC's had 24 splines at the drive members. It's the inner spline count that matters when you're figuring out what diffs you have. My bet is you have 10 splines at the diff. I have never seen a 24 spline rear (at the diff) with removable drive members. Every 24 spline rear axle I have ever seen from the factory was a one piece deal with the drive member permanently attached to the half shaft. __________________ Paul Grant paulgrant@mac.com http://stores.ebay.com/Classic-Rovers 203-770-1699

04-21-2008, 04:16 PM	#3 (permalink)
ArmyRover Rebuilding Rover Join Date: Sep 2007 Location: NH Posts: 1,730 Gallery: 0	damn you ruined my happy dance Paul..... __________________ "Only two defining forces ever offered to die for you, Jesus Christ and the American G.I. One died for your soul, the other for your freedom." http://snhlr.org/ 91 Range Rover Classic 90 RRC Parts truck 94 Saab gas mileage beater

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
spline count on rrc's.....	daway	Range Rover Classic	8	06-29-2007 07:37 PM
Scorpion Racing Rear Bumper Install w/pics.	beavis4g63t	Discovery Series I	10	10-17-2006 01:38 PM
TOO MUCH STUFF, Disco/RRC/Series/Defender/P38 GARAGE SALE	RedRhinoProducts	Land Rover Parts and Accessories	8	10-16-2006 09:41 PM
Oh man...(flame suit is on)	02disco2	The Lounge	9	03-27-2006 11:51 AM
1999 4.6 needs some work; fix or sell?	Spring	Range Rover P38, Mk III and Range Rover Sport	17	01-29-2006 01:18 PM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-21-2008, 04:20 PM	#4 (permalink)
p76rangie Ian Matthews Join Date: Jan 2006 Location: Melbourne Australia Posts: 1,912 Gallery: 0	If the drive flange has been removed, the axle should just come straight out. So you can pull it out and have a look. After market axles have drive flanges on 24 spline axles.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)