'94 LR Discovery I - towing - Land Rovers Only

PLD · 04-19-2007, 06:58 AM

I want to convert the existing 7-pin plug to a US standard 4-pin. May people I've chatted to say there is no adapter and it will cost $350 - $400 to get wired up by an auto electrician. Has anyone had any experience in a work-around of some type. All suggestions welcome. Thanks

Disco Mike · 04-19-2007, 07:21 AM

Go you your local trailor shop, they make a couple of adapters that will plug into your seven pin and convert to a 4 pin plug, and they are cheap, around $20.
Mike

PLD · 04-19-2007, 07:31 AM

Thanks for the quick response. I have checked out all available adapters and there is nothing. Check out the attached picture.

k12 · 04-19-2007, 12:13 PM

No attached picture.

I bought the coversion kit from AB for 58 (they say its plug and play). I have yet to plug it in and test, but I researched it and everyone said it works great. Good luck

PLD · 04-19-2007, 12:59 PM

Thanks guys. I'm new here, but the image is now attached. The scale shown is 1 inch.

04-19-2007, 06:58 AM	#1 (permalink)
PLD Member Join Date: Apr 2007 Posts: 3 Gallery: 0	'94 LR Discovery I - towing I want to convert the existing 7-pin plug to a US standard 4-pin. May people I've chatted to say there is no adapter and it will cost $350 - $400 to get wired up by an auto electrician. Has anyone had any experience in a work-around of some type. All suggestions welcome. Thanks

04-19-2007, 12:59 PM	#5 (permalink)
PLD Member Join Date: Apr 2007 Posts: 3 Gallery: 0	Thanks guys. I'm new here, but the image is now attached. The scale shown is 1 inch. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-19-2007, 07:21 AM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,290 Gallery: 0	Go you your local trailor shop, they make a couple of adapters that will plug into your seven pin and convert to a 4 pin plug, and they are cheap, around $20. Mike

04-19-2007, 07:31 AM	#3 (permalink)
PLD Member Join Date: Apr 2007 Posts: 3 Gallery: 0	Thanks for the quick response. I have checked out all available adapters and there is nothing. Check out the attached picture.

04-19-2007, 12:13 PM	#4 (permalink)
k12 Senior Member Join Date: Mar 2005 Location: Carlisle, PA Posts: 144 Gallery: 0	No attached picture. I bought the coversion kit from AB for 58 (they say its plug and play). I have yet to plug it in and test, but I researched it and everyone said it works great. Good luck

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)