96 D1 No Spark Help!!!!!!!! - Land Rovers Only

TIMO · 08-13-2006, 04:54 PM

I have a 96 D1 ....I just put back together after having a valve job. I have fuel pressure at the rail but no spark at the plugs. I have power on 1 of the 5 ins in the coil pack connector. I'm not sure if that is correct or not, a common pawer and 4 separate grounds??? One for each pack? How can I test the individual coil packs and is there a way to test the ECM??? I had miss fire codes and sticking valves before the valve job if that makes any difference. Thanks for any help !!!!

Tim O.

Rovin4life · 08-13-2006, 05:08 PM

crank sensor

TIMO · 08-14-2006, 05:21 PM

How could the crank sensor go bad just sitting for 2 weeks?? I said to myself, Turns out the sensor came unplugged inside the guard. Thanks

Tim

08-13-2006, 04:54 PM	#1 (permalink)
TIMO Member Join Date: Aug 2006 Location: CT Posts: 2 Gallery: 0	96 D1 No Spark Help!!!!!!!! I have a 96 D1 ....I just put back together after having a valve job. I have fuel pressure at the rail but no spark at the plugs. I have power on 1 of the 5 ins in the coil pack connector. I'm not sure if that is correct or not, a common pawer and 4 separate grounds??? One for each pack? How can I test the individual coil packs and is there a way to test the ECM??? I had miss fire codes and sticking valves before the valve job if that makes any difference. Thanks for any help !!!! Tim O.

08-14-2006, 05:21 PM	#3 (permalink)
TIMO Member Join Date: Aug 2006 Location: CT Posts: 2 Gallery: 0	How could the crank sensor go bad just sitting for 2 weeks?? I said to myself, Turns out the sensor came unplugged inside the guard. Thanks Tim Last edited by TIMO : 08-15-2006 at 06:38 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-13-2006, 05:08 PM	#2 (permalink)
Rovin4life Former NAS LR TECH, Current AUS LR TECH Join Date: Oct 2005 Location: DOWN UNDER Posts: 1,884 Gallery: 0	crank sensor

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)