Alarm Fob question - Land Rovers Only

Private Iron · 11-01-2005, 09:52 AM

Alright, so I am getting sick of opening my doors with my key. It wouldn't be so bad if I could open any door, but if I don't open the driver's door first, the alarm goes off. So I figured I would break down and buy an alarm remote. Have a '98 so I know I have to get the 2 button, but do I really have to have a dealer program it? Anyway to do it myself or you think a stereo shop that installs alarms might be able to? Thanks

dent · 11-01-2005, 10:19 AM

nope sorry... dealer only thing

don't know where you're looking but i ended up picking 1 up on ebay for about $20
take care

Private Iron · 11-01-2005, 12:16 PM

20 bucks isn't bad. Did it cost you a ton to have the thing programmed?

dent · 11-01-2005, 12:32 PM

no, nothing wrong with the circuit or anything, the cover broke, i drove over it :S good thing the circuit board and crap didn't break so i just swapped out the cover for the new one. Buttons didn't work too well with all the duct tape on it

Though i think the going rate to get it reprogrammed depends on how nice the service person is... heard anywhere from from to $70
take care

Private Iron · 11-01-2005, 12:53 PM

I can handle 70 bucks I suppose, just wanted to know what other people where paying before I called the dealer. Thanks man

surffx@hotmail.com · 11-04-2005, 12:08 PM

I took a round about way of doing it.

1. Bought one used on ebay ($20)
2. Bought a new plastic shell for it from roverconnection.com ($15)
3. Dealer quoted me 50 bucks to prgram it, just haven't set up an appointment yet.

Total: $85

Doesn't sound like I took the best route, but I herd buying a brand new one from the dealer is close to $100 plus the $50 to program.

11-01-2005, 09:52 AM	#1 (permalink)
Private Iron These pretzels are making me thirsty Join Date: Sep 2005 Location: Norman, OK Posts: 289 Gallery: 0	Alarm Fob question Alright, so I am getting sick of opening my doors with my key. It wouldn't be so bad if I could open any door, but if I don't open the driver's door first, the alarm goes off. So I figured I would break down and buy an alarm remote. Have a '98 so I know I have to get the 2 button, but do I really have to have a dealer program it? Anyway to do it myself or you think a stereo shop that installs alarms might be able to? Thanks __________________ I love it when a plan comes together. '98 Disco LE- bone stock, but with aspirations

11-01-2005, 12:16 PM	#3 (permalink)
Private Iron These pretzels are making me thirsty Join Date: Sep 2005 Location: Norman, OK Posts: 289 Gallery: 0	20 bucks isn't bad. Did it cost you a ton to have the thing programmed? __________________ I love it when a plan comes together. '98 Disco LE- bone stock, but with aspirations

11-01-2005, 12:53 PM	#5 (permalink)
Private Iron These pretzels are making me thirsty Join Date: Sep 2005 Location: Norman, OK Posts: 289 Gallery: 0	I can handle 70 bucks I suppose, just wanted to know what other people where paying before I called the dealer. Thanks man __________________ I love it when a plan comes together. '98 Disco LE- bone stock, but with aspirations

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

11-01-2005, 10:19 AM	#2 (permalink)
dent beer drinking member Join Date: Aug 2004 Posts: 322 Gallery: 0	nope sorry... dealer only thing don't know where you're looking but i ended up picking 1 up on ebay for about $20 take care

11-01-2005, 12:32 PM	#4 (permalink)
dent beer drinking member Join Date: Aug 2004 Posts: 322 Gallery: 0	no, nothing wrong with the circuit or anything, the cover broke, i drove over it :S good thing the circuit board and crap didn't break so i just swapped out the cover for the new one. Buttons didn't work too well with all the duct tape on it Though i think the going rate to get it reprogrammed depends on how nice the service person is... heard anywhere from from to $70 take care

11-04-2005, 12:08 PM	#6 (permalink)
surffx@hotmail.com Member Join Date: Sep 2005 Location: Reno, NV Posts: 4 Gallery: 0	I took a round about way of doing it. 1. Bought one used on ebay ($20) 2. Bought a new plastic shell for it from roverconnection.com ($15) 3. Dealer quoted me 50 bucks to prgram it, just haven't set up an appointment yet. Total: $85 Doesn't sound like I took the best route, but I herd buying a brand new one from the dealer is close to $100 plus the $50 to program.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)