Brake light problem - Land Rovers Only

marcR · 09-26-2004, 11:15 AM

Have 1996 Dico II problem with brake lights not coming on when brake light depressed. I check all fuses - test OK. There are 2 plunger switches by the brake peddle ( large rectangular one, smaller round one ) which of these is for the break lights or are both? Help no manuals.

Disco Mike · 09-26-2004, 10:19 PM

I think it is the larger plud, you should test both and see if you get a signal when the pedal is depressed.
Mike J

Adam in NYC USA · 09-29-2004, 09:55 AM

Howdy!

I had a nonworking left reverse light I had to work on. The filament was blown , replaced the bulb but I had also found the Molexpower connector had worked its way out. A good push , and the connector snapped back in place and all was working.

On eBay, there are plenty of folks selling the service manuals for the LandRovers for cheap,if you have a laptop or Windows computer.

rovertech · 09-29-2004, 11:17 AM

if you can get the truck out of park then the switch is ok if not its the rectangular (or bottom) switch.

09-26-2004, 11:15 AM	#1 (permalink)
marcR Member Join Date: Sep 2004 Location: new jersey Posts: 1 Gallery: 0	Brake light problem Have 1996 Dico II problem with brake lights not coming on when brake light depressed. I check all fuses - test OK. There are 2 plunger switches by the brake peddle ( large rectangular one, smaller round one ) which of these is for the break lights or are both? Help no manuals.

09-29-2004, 09:55 AM	#3 (permalink)
Adam in NYC USA The Urban Motorist Join Date: Sep 2004 Location: New York City Posts: 985 Gallery: 0	Push in all your connectors.... Howdy! I had a nonworking left reverse light I had to work on. The filament was blown , replaced the bulb but I had also found the Molexpower connector had worked its way out. A good push , and the connector snapped back in place and all was working. On eBay, there are plenty of folks selling the service manuals for the LandRovers for cheap,if you have a laptop or Windows computer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

09-26-2004, 10:19 PM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,777 Gallery: 0	I think it is the larger plud, you should test both and see if you get a signal when the pedal is depressed. Mike J

09-29-2004, 11:17 AM	#4 (permalink)
rovertech Member Join Date: Sep 2004 Location: chicago suburbs Posts: 62 Gallery: 0	if you can get the truck out of park then the switch is ok if not its the rectangular (or bottom) switch.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)