check engine codes - Page 3 - Land Rovers Only

apbtpetey · 12-07-2006, 08:16 AM

Replaced the steeper motor and it helped a little bit, but the problem is still here, not stalling now, but the idle issue is still here.

In addition I noticed that when I rev it up and let off the gas I get a pop pop pop type sound not real loud, but still there coming through the exhaust system

apbtpetey · 12-08-2006, 07:54 AM

Okay so driving it yesterday and everything is fine except for the fact the CE light was still on. No more idle issue though.

I went to Auto Zone and had them run the codes, well there were 9 of them in there, most were misfire codes for various cylinders, along with the 0300 and a 1178 code. So the guy said they just might need to cleared from the system. He cleared them and so far so good, no issues at all and no more CE light. Lets hope it stays this way.

Paul Grant · 12-08-2006, 10:20 AM

John,
I got your PayPal payment. Thank you. I'm also glad to hear that the truck is ehaving. As far as the crank sensor is concerned you'd need to test it with an ohm meter to see if resistance is correct. I am not that familiar with ODDII engines but would have to imagine you'd find the test procedure in your repair manual or RAV CD.
Cheers,
Paul

apbtpetey · 12-10-2006, 06:48 PM

Well the CE light came back on, but the idle issue was gone. I had to make a decision on if it was really worth it to keep casing this problem.

So I made the choice to get rid of the Disco. I miss it already, but think in the long run it was the best choice for me.

Now its time for me to really start looking at some series rovers something that I can rebuild/restore is what I am going for. You know take my time and go over it and do it right. So let the research being for me. Thanks again for all your help with trying to solve this problem

Paul Grant · 12-10-2006, 07:12 PM

John,
Contact Terry. He has a really nice SIIa soft top that he restored last year. Being the old fart that he is, he's given up on leaf springs and manual transmissions.
Cheers,
Paul

apbtpetey · 12-10-2006, 07:34 PM

I just might have to get a hold of him, but I really want to find something I can restore you know get my hands dirty. I thinking something that I can get my son into doing as well and maybe it being a first car for him. He is only 11 so I have time

Kevin88RRC · 12-11-2006, 04:23 AM

Sorry to hear ya got rid of her, but I had remembered seeing a couple Series online and dug em up. Just thought I'd pass them on. And when do you see ANYTHING at Copley for under $6K!

http://www.copleymotorcars.com/land_...5.3vo1003.html
http://www.eastcoastrover.com/ecrforsale.html

12-07-2006, 08:16 AM	#31 (permalink)
apbtpetey Support Our Troops Join Date: Jan 2005 Location: Hudson Valley, NY Posts: 3,444 Gallery: 0	Replaced the steeper motor and it helped a little bit, but the problem is still here, not stalling now, but the idle issue is still here. In addition I noticed that when I rev it up and let off the gas I get a pop pop pop type sound not real loud, but still there coming through the exhaust system __________________ John Conklin LRO Moderator

12-08-2006, 07:54 AM	#32 (permalink)
apbtpetey Support Our Troops Join Date: Jan 2005 Location: Hudson Valley, NY Posts: 3,444 Gallery: 0	Okay so driving it yesterday and everything is fine except for the fact the CE light was still on. No more idle issue though. I went to Auto Zone and had them run the codes, well there were 9 of them in there, most were misfire codes for various cylinders, along with the 0300 and a 1178 code. So the guy said they just might need to cleared from the system. He cleared them and so far so good, no issues at all and no more CE light. Lets hope it stays this way. __________________ John Conklin LRO Moderator

12-10-2006, 06:48 PM	#34 (permalink)
apbtpetey Support Our Troops Join Date: Jan 2005 Location: Hudson Valley, NY Posts: 3,444 Gallery: 0	Well the CE light came back on, but the idle issue was gone. I had to make a decision on if it was really worth it to keep casing this problem. So I made the choice to get rid of the Disco. I miss it already, but think in the long run it was the best choice for me. Now its time for me to really start looking at some series rovers something that I can rebuild/restore is what I am going for. You know take my time and go over it and do it right. So let the research being for me. Thanks again for all your help with trying to solve this problem __________________ John Conklin LRO Moderator

12-10-2006, 07:34 PM	#36 (permalink)
apbtpetey Support Our Troops Join Date: Jan 2005 Location: Hudson Valley, NY Posts: 3,444 Gallery: 0	I just might have to get a hold of him, but I really want to find something I can restore you know get my hands dirty. I thinking something that I can get my son into doing as well and maybe it being a first car for him. He is only 11 so I have time __________________ John Conklin LRO Moderator

12-11-2006, 04:23 AM	#37 (permalink)
Kevin88RRC Senior Member Join Date: Sep 2004 Location: Portland, Maine Posts: 727 Gallery: 0	Sorry to hear ya got rid of her, but I had remembered seeing a couple Series online and dug em up. Just thought I'd pass them on. And when do you see ANYTHING at Copley for under $6K! http://www.copleymotorcars.com/land_...5.3vo1003.html http://www.eastcoastrover.com/ecrforsale.html __________________ Kevin 88 RRC "Audrey"

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

12-08-2006, 10:20 AM	#33 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 954 Gallery: 0	John, I got your PayPal payment. Thank you. I'm also glad to hear that the truck is ehaving. As far as the crank sensor is concerned you'd need to test it with an ohm meter to see if resistance is correct. I am not that familiar with ODDII engines but would have to imagine you'd find the test procedure in your repair manual or RAV CD. Cheers, Paul

12-10-2006, 07:12 PM	#35 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 954 Gallery: 0	John, Contact Terry. He has a really nice SIIa soft top that he restored last year. Being the old fart that he is, he's given up on leaf springs and manual transmissions. Cheers, Paul

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode