cruise control on 95 - Land Rovers Only

itsarova · 05-05-2006, 12:26 PM

anyone know of any quick ways to fix cruise control?, the button lights up when i press it but it doesn't show any signs of working, all of the fuses are good also

DickVII · 05-05-2006, 01:07 PM

I have the same problem with my 96' and can't figure it out for the life of me... Methinks it happened when I had a new engine installed.

jhmover · 05-05-2006, 01:38 PM

Check the vacuum line that goes to it. Mine did same thing, it was split. I cut back beyond the split and voila! Works again.

Funrover · 05-05-2006, 01:41 PM

Quote:

Originally Posted by jhmover

Check the vacuum line that goes to it. Mine did same thing, it was split. I cut back beyond the split and voila! Works again.

x2.... that's how I fixed a buddies

nzoliver · 05-05-2006, 02:48 PM

Hi from New Zealand!

Yep, split pipes all the way! I have 3 on my 300Tdi!! Damned hard to get to as well especially the 1 under the front to the pump.

Oh well off for a go at it..

wade · 05-05-2006, 04:47 PM

Mine wasn't working and as I recall it was the relay in the passenger footwell.

AZROVER · 05-06-2006, 12:43 AM

I have the same issue. Where do you get at this vacum hose from? Under the dash or from the engine bay? -thanks

05-05-2006, 12:26 PM	#1 (permalink)
itsarova Pulling out a Hummer Join Date: Mar 2006 Location: Tennessee Posts: 10 Gallery: 0	cruise control on 95 anyone know of any quick ways to fix cruise control?, the button lights up when i press it but it doesn't show any signs of working, all of the fuses are good also

05-05-2006, 02:48 PM	#5 (permalink)
nzoliver Member Join Date: Aug 2005 Location: Lake Tekapo, New Zealand Posts: 56 Gallery: 5	Cruise cont Hi from New Zealand! Yep, split pipes all the way! I have 3 on my 300Tdi!! Damned hard to get to as well especially the 1 under the front to the pump. Oh well off for a go at it..

05-05-2006, 04:47 PM	#6 (permalink)
wade Senior Member Join Date: May 2005 Posts: 131 Gallery: 0	Check the relay...passenger footwell Mine wasn't working and as I recall it was the relay in the passenger footwell. __________________ Wade Location: Texas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

05-05-2006, 01:07 PM	#2 (permalink)
DickVII Vehicular Limitations Tester Join Date: Dec 2005 Location: Kalispell, Montana, USA Posts: 10 Gallery: 0	I have the same problem with my 96' and can't figure it out for the life of me... Methinks it happened when I had a new engine installed.

05-05-2006, 01:38 PM	#3 (permalink)
jhmover Senior Member Join Date: Aug 2005 Posts: 310 Gallery: 0	Check the vacuum line that goes to it. Mine did same thing, it was split. I cut back beyond the split and voila! Works again.

05-06-2006, 12:43 AM	#7 (permalink)
AZROVER Senior Member Join Date: Jun 2005 Location: ASU/Tempe(school), Chicago in the summer. Posts: 133 Gallery: 0	I have the same issue. Where do you get at this vacum hose from? Under the dash or from the engine bay? -thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)