Different Location Of Fuel Pump Relay? - Land Rovers Only

Toddicus · 11-16-2004, 07:47 PM

alright guys..i'm totally mind boggled here...i'm trying to replace my fuel pump relay but its NOT where it's supposed to be..i have the chart, and there are like 3 relays that are not there...i've look all around on passenger kick panel..and even the driver side...no luck...i've been looking for about 4 hours now....no luck...any help is appreciated...

Wes DownUnder · 11-17-2004, 12:27 AM

I'm pretty sure that the Fuel Pump relay lived on a metal bracket that is situated behind one of the kick panels.

lynall · 11-19-2004, 12:42 PM

I thought it was in the engine bay bolted to the bulkhead.

Lynall

Wes DownUnder · 11-19-2004, 07:49 PM

The inertia switch is bolted to the bulkhead behind the washer bottle, it doesn't take much to set them off either.

LRWheelman · 11-20-2004, 10:05 PM

Hey Toddicus, remove your passenger-side kick panel "screw" or "screws", if you can call them that. They are the short plastic fasteners that hold the kick panel cover in place. I think that you can unscrew them w/a dime or a penny similiar to the way as the drivers side fuse box cover opens. The kick panel cover is a trick to get out, but once removed you will see all of your relays. If you have a map of those relays I would like to get a copy, if at all possible. Good Luck, and Thank You, LRW.

11-16-2004, 07:47 PM	#1 (permalink)
Toddicus Member Join Date: Aug 2004 Location: Bay Area, Cali Posts: 78 Gallery: 0	Different Location Of Fuel Pump Relay? alright guys..i'm totally mind boggled here...i'm trying to replace my fuel pump relay but its NOT where it's supposed to be..i have the chart, and there are like 3 relays that are not there...i've look all around on passenger kick panel..and even the driver side...no luck...i've been looking for about 4 hours now....no luck...any help is appreciated... __________________ 1997 Disco SE -Forest Green K&N Air Induction System RoverTek Performance Computer BORLA Exhaust System OME H/D Shocks 31'' Good Year Wrangler MT Tires RoverTym 2'' Lift Springs Kenwood MP3 Player Kenwood 800W Amp 2 10' JL AUDIO Sub's In Custom Box In Car DVD System W/ 3 6.5'' Monitors 1990 Nissan Twin Turbo 300ZX 700HP 1992 Nissan Non Turbo 300ZX 300HP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

11-17-2004, 12:27 AM	#2 (permalink)
Wes DownUnder Member Join Date: Oct 2004 Posts: 34 Gallery: 0	I'm pretty sure that the Fuel Pump relay lived on a metal bracket that is situated behind one of the kick panels.

11-19-2004, 12:42 PM	#3 (permalink)
lynall Member Join Date: Aug 2004 Posts: 16 Gallery: 0	I thought it was in the engine bay bolted to the bulkhead. Lynall

11-19-2004, 07:49 PM	#4 (permalink)
Wes DownUnder Member Join Date: Oct 2004 Posts: 34 Gallery: 0	The inertia switch is bolted to the bulkhead behind the washer bottle, it doesn't take much to set them off either.

11-20-2004, 10:05 PM	#5 (permalink)
LRWheelman Senior Member Join Date: Oct 2004 Location: Stoutland, Missouri Posts: 138 Gallery: 0	Hey Toddicus, remove your passenger-side kick panel "screw" or "screws", if you can call them that. They are the short plastic fasteners that hold the kick panel cover in place. I think that you can unscrew them w/a dime or a penny similiar to the way as the drivers side fuse box cover opens. The kick panel cover is a trick to get out, but once removed you will see all of your relays. If you have a map of those relays I would like to get a copy, if at all possible. Good Luck, and Thank You, LRW.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)