disco 1 turns over no fire - Land Rovers Only

rover42 · 04-20-2008, 08:17 AM

IT HAPPENED LAST NIGHT, DROVE 20 MILES TO A LACROSS GAME, RUCK SAT FOR 3 HOURS, GOT BACK IN AND NOTHING, IT JUST TURNS AND TURN AND TURNS, IT SEEMS TO HAVE NO SPARK. I HAVE PRESS IN FUEL RAIL. FUEL PUMP TURNS ON, BATT. HAS FULL CHARGE.

97 SD DISCO 1 WITH STICK.

afirover · 04-22-2008, 08:18 PM

try and see if the mutifuntion relay on the pass side under the hood and looks like a black box about 3.5-4 " wide by 1.5 deep or thick has two plags on it unplug and reconect and see if that helps sometimes but not every time
this unit controls the fuel pump .......

hope this helps
afi

rover42 · 04-23-2008, 05:53 AM

thanks but the fuel pump works like a champ, i think i have naroowed it down to te ecu.

Elemental · 04-23-2008, 06:05 AM

http://www.landroversonly.com/forums...nciples-23603/

ArmyRover · 04-23-2008, 07:13 AM

Quote:

Originally Posted by rover42

IT SEEMS TO HAVE NO SPARK.

Confirm this tidbit first before jumping on the ecu. ECU failures are not real common unless your leaving out the part where you submerged it in water

.

rover42 · 04-23-2008, 07:27 AM

Thanks Guy's I Have Looked For A The Same Stuff. I Have Plenty Of Fuel Press. The Intake Is Clear, My Timing Is Or Should Be Right On. I Just Have No Spark. I Jumped To An Ecu Conclusion Because My Check Engin Light Is Always On Do To A O2 Sensor, Now When I Turn The Igntion On The Check Engin Light Does Not Show At All. Plus I Have To Have The Key In The On Postion For 5-8 Sec Befor The Motor Wil Start To Crank.

Elemental · 04-23-2008, 07:43 AM

Your security computer needs to be synced with your engine computer. That has to be done at the dealer using testbook. Rover had a TSB about this.

ArmyRover · 04-23-2008, 08:36 AM

Quote:

Originally Posted by rover42

Thanks Guy's I Have Looked For A The Same Stuff. I Have Plenty Of Fuel Press. The Intake Is Clear, My Timing Is Or Should Be Right On. I Just Have No Spark. I Jumped To An Ecu Conclusion Because My Check Engin Light Is Always On Do To A O2 Sensor, Now When I Turn The Igntion On The Check Engin Light Does Not Show At All. Plus I Have To Have The Key In The On Postion For 5-8 Sec Befor The Motor Wil Start To Crank.

What Elemental said....

For the love of God would you quit CAPITALIZING every damn word. Your giving me a skull cramp. Thank you that is all.

rover42 · 04-23-2008, 01:12 PM

Quote:

Originally Posted by ArmyRover

What Elemental said....

For the love of God would you quit CAPITALIZING every damn word. Your giving me a skull cramp. Thank you that is all.

sorry armyrover, lol i had my freind that is the lead tech at my landrover dealership come over and he told me the same thing about the security lock out. THANKS all for the help AND THE SKULL CRAMPs..

afirover · 04-23-2008, 02:48 PM

I can tell you how to go around it in a pinch BUT I will not post it on the web
call me for details afi
317-294-0071

rover42 · 04-23-2008, 05:05 PM

Thanks AFI i will call you later for the info, THANK YOU VERY VERY MUCH.

04-20-2008, 08:17 AM	#1 (permalink)
rover42 Member Join Date: Apr 2008 Location: ELMA,NY Posts: 13 Gallery: 0	disco 1 turns over no fire IT HAPPENED LAST NIGHT, DROVE 20 MILES TO A LACROSS GAME, RUCK SAT FOR 3 HOURS, GOT BACK IN AND NOTHING, IT JUST TURNS AND TURN AND TURNS, IT SEEMS TO HAVE NO SPARK. I HAVE PRESS IN FUEL RAIL. FUEL PUMP TURNS ON, BATT. HAS FULL CHARGE. 97 SD DISCO 1 WITH STICK.

04-23-2008, 06:05 AM	#4 (permalink)
Elemental Senior Member Join Date: Feb 2007 Posts: 3,146 Gallery: 0	http://www.landroversonly.com/forums...nciples-23603/ __________________ I only worry about myself, screw the others.

04-23-2008, 07:43 AM	#7 (permalink)
Elemental Senior Member Join Date: Feb 2007 Posts: 3,146 Gallery: 0	Your security computer needs to be synced with your engine computer. That has to be done at the dealer using testbook. Rover had a TSB about this. __________________ I only worry about myself, screw the others.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Should I buy a 97Disco or a Disco II?	keroppi	Discovery Series I	7	07-24-2008 08:47 PM
My trail-ready Disco I for your stock Disco II	chelo	Land Rover Vehicles	0	11-18-2007 09:55 PM
Pre-95 Disco Newbie needs more advice	pfkb72	Discovery Series I	18	09-12-2005 09:49 AM
Help empty my garage! Ton's of parts..	RedRhinoProducts	Land Rover Parts and Accessories	9	05-11-2005 01:25 PM
new guy looking for mid 90's disco and info	tire	General Land Rover Discussion	2	10-10-2004 07:11 AM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-22-2008, 08:18 PM	#2 (permalink)
afirover AFIROVER Join Date: Feb 2006 Location: INDY IN Posts: 229 Gallery: 0	try and see if the mutifuntion relay on the pass side under the hood and looks like a black box about 3.5-4 " wide by 1.5 deep or thick has two plags on it unplug and reconect and see if that helps sometimes but not every time this unit controls the fuel pump ....... hope this helps afi

04-23-2008, 05:53 AM	#3 (permalink)
rover42 Member Join Date: Apr 2008 Location: ELMA,NY Posts: 13 Gallery: 0	thanks but the fuel pump works like a champ, i think i have naroowed it down to te ecu.

04-23-2008, 07:27 AM	#6 (permalink)
rover42 Member Join Date: Apr 2008 Location: ELMA,NY Posts: 13 Gallery: 0	Thanks Guy's I Have Looked For A The Same Stuff. I Have Plenty Of Fuel Press. The Intake Is Clear, My Timing Is Or Should Be Right On. I Just Have No Spark. I Jumped To An Ecu Conclusion Because My Check Engin Light Is Always On Do To A O2 Sensor, Now When I Turn The Igntion On The Check Engin Light Does Not Show At All. Plus I Have To Have The Key In The On Postion For 5-8 Sec Befor The Motor Wil Start To Crank.

04-23-2008, 02:48 PM	#10 (permalink)
afirover AFIROVER Join Date: Feb 2006 Location: INDY IN Posts: 229 Gallery: 0	I can tell you how to go around it in a pinch BUT I will not post it on the web call me for details afi 317-294-0071

04-23-2008, 05:05 PM	#11 (permalink)
rover42 Member Join Date: Apr 2008 Location: ELMA,NY Posts: 13 Gallery: 0	Thanks AFI i will call you later for the info, THANK YOU VERY VERY MUCH.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)