Discovery Engine going to stop - Land Rovers Only

mr_Rover · 07-25-2005, 07:37 AM

Dear All,

I just buy a discovery 95 V8 automatic and I have a big problem sometimes when I move the gear to D or R the engine go to stop as very low RPM and sometimes work normally any body have any idea from where I start to fix this problem
Nb: I got a new problem when I am on something high with front wheel the engine like crazy it’s going very slow and up and final go off
Thank you All

pavel · 07-25-2005, 02:53 PM

Check that your idle engine speed is about 700-800 RPM. If the engine idles at 500 RPM (or less) then it will probably stall when you put it into gear (D or R). Also there is a 'stepper motor' ( called a 'idle air control valve' sometimes) attached to the throttle box that might need cleaning or replacing. If your are not used to playing with engines like this one, get some help from a good mechanic.

Disco · 07-25-2005, 04:28 PM

If your engine idle speed is low as Pavel has mentioned, wind up the throttle cable to increase your rpm's.

anonimaus · 08-09-2005, 01:17 PM

I wouldn't tighten the throttle cable as the first fix. It is usually the stepper motor or junk in the vac. line.

07-25-2005, 07:37 AM	#1 (permalink)
mr_Rover Member Join Date: Jul 2005 Posts: 1 Gallery: 0	New problem Discovery Engine going to stop Dear All, I just buy a discovery 95 V8 automatic and I have a big problem sometimes when I move the gear to D or R the engine go to stop as very low RPM and sometimes work normally any body have any idea from where I start to fix this problem Nb: I got a new problem when I am on something high with front wheel the engine like crazy it’s going very slow and up and final go off Thank you All Last edited by mr_Rover : 07-27-2005 at 05:45 AM.

07-25-2005, 04:28 PM	#3 (permalink)
Disco Super Moderator Join Date: Dec 2004 Posts: 1,819 Gallery: 0	If your engine idle speed is low as Pavel has mentioned, wind up the throttle cable to increase your rpm's. __________________ No hand signals, driver playing with his transfer Knob.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

07-25-2005, 02:53 PM	#2 (permalink)
pavel Senior Member Join Date: Aug 2004 Location: Vancouver, Canada Posts: 433 Gallery: 0	Check that your idle engine speed is about 700-800 RPM. If the engine idles at 500 RPM (or less) then it will probably stall when you put it into gear (D or R). Also there is a 'stepper motor' ( called a 'idle air control valve' sometimes) attached to the throttle box that might need cleaning or replacing. If your are not used to playing with engines like this one, get some help from a good mechanic.

08-09-2005, 01:17 PM	#4 (permalink)
anonimaus Member Join Date: Aug 2005 Posts: 5 Gallery: 0	I wouldn't tighten the throttle cable as the first fix. It is usually the stepper motor or junk in the vac. line.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)