![]() |
![]() |
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Senior Member
Join Date: Jan 2005
Location: Int'l Falls MN
Posts: 178
Gallery:
0
|
I'm just curious if anybody has put dual exhast on their disco, and if so what kind of results did you get? was it worth it?
__________________
99 disco ii w/ cold climate and SLS. |
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Super Moderator
Join Date: Dec 2004
Posts: 1,819
Gallery:
0
|
I have headers fitted to both my discos but they join into a single exhaust pipe. Unless you have intentions on doing major engine modifications the expense of getting a dual pipe exhaust system made would not be worth the small amount of gain you would achieve. If on the other hand you are not going to do engine mods, then some small gains can be achieved with a set of headers with a single pipe exhaust.
__________________
No hand signals, driver playing with his transfer Knob. |
|
|
|
|
|
#4 (permalink) |
|
Moderator
![]() Join Date: Aug 2004
Location: Parker, Colorado
Posts: 5,784
Gallery:
0
|
I agree, even cat back dual, if it were available woudn't be worth the money with out alot of engine mods. also. Besides it will just be one more thing that will get in the way off the road.
Mike J. |
|
|
|
|
|
#5 (permalink) |
|
Moderator
![]() Join Date: Aug 2004
Location: Durham, NC U.S.A.
Posts: 523
Gallery:
0
|
plastic:
I'm working this out as a future summer project,but the only way to go is installing a universal single-to-dual exit muffler with the same measurements as the OE one, and then having them both exit at the driver's side, just as the early range rovers,as you will have clearance issues on the passenger side,besides that if you modify the cat setting,you will have issues with a continuous service engine light(there are 4 O2 sensors,so the thing is pretty sensitive...). Carlos Last edited by Carlos : 01-31-2005 at 03:29 PM. |
|
|
|