help - Land Rovers Only

floridadiscoI · 02-08-2007, 07:41 PM

since my diffs wouldnt lock i took off the center console nd WD-40ed the linkage, its not that rusty but still wont lock for some reason

please help i dont feel like driveing with the console off

me.guevara · 02-08-2007, 08:54 PM

Did you try this site?

http://home.twcny.rr.com/eeibooks/ro...codifflock.htm

Disco Mike · 02-09-2007, 05:13 AM

You may also have a solenoid stuck in the T/case that will not allow it to shift.
If that is the case, you can replace it, by-pass it and some people have just removed it, never to have it stick again.
Mike

floridadiscoI · 02-09-2007, 08:50 AM

how would i by-pass or remove it?

floridadiscoI · 02-10-2007, 01:14 PM

nevermind, i got them to engage. i jus have to do it from under the car

01001010 · 02-10-2007, 02:08 PM

Hey Florida, where exactly are you located???

02-08-2007, 07:41 PM	#1 (permalink)
floridadiscoI Senior Member Join Date: Dec 2006 Posts: 117 Gallery: 0	help since my diffs wouldnt lock i took off the center console nd WD-40ed the linkage, its not that rusty but still wont lock for some reason please help i dont feel like driveing with the console off

02-08-2007, 08:54 PM	#2 (permalink)
me.guevara MG Join Date: Aug 2005 Location: Bolivia Posts: 720 Gallery: 0	Did you try this site? http://home.twcny.rr.com/eeibooks/ro...codifflock.htm __________________ ________________________ MG '95 Disco I, 3.9L V8i 5-speed Discoverying Bolivia...

02-10-2007, 02:08 PM	#6 (permalink)
01001010 Moderator Join Date: Jan 2005 Location: Lawrenceville, GA Posts: 4,543 Gallery: 15	Hey Florida, where exactly are you located??? __________________ JC... 1996 Discovery SE - The Blue Marlin - gone =( 1965 Series IIa 109 RHD 2.25L Dsl - Wilks 1965 Series IIa 88' LHD 2.25L Petrol - Fionna

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

02-09-2007, 05:13 AM	#3 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,784 Gallery: 0	You may also have a solenoid stuck in the T/case that will not allow it to shift. If that is the case, you can replace it, by-pass it and some people have just removed it, never to have it stick again. Mike

02-09-2007, 08:50 AM	#4 (permalink)
floridadiscoI Senior Member Join Date: Dec 2006 Posts: 117 Gallery: 0	how would i by-pass or remove it?

02-10-2007, 01:14 PM	#5 (permalink)
floridadiscoI Senior Member Join Date: Dec 2006 Posts: 117 Gallery: 0	nevermind, i got them to engage. i jus have to do it from under the car

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)