More Electrical Problems!! HELP! - Land Rovers Only

Badger · 08-23-2005, 10:09 AM

My back windows refuse to roll up. I have replaced the fuses tested the wiring. I have done almost everthing I can think of except take apart the door. The wet and cold is coming, I need those windows up!! Any suggestions?

Badger · 08-23-2005, 10:14 AM

Where is the window lift ECU located?
Some of these questions may sound silly but I am used to working on VW.

pavel · 08-23-2005, 11:21 PM

The controller should be behind the glove box. Chances are there is a fault in the circuit board otherwise it is more likely one rear window would still work. For pictures and details on this repair try: www.discoweb.org/window/

Badger · 08-24-2005, 09:48 AM

Thankyou!!!!!!!!

Your awesome!!

Badger · 08-24-2005, 08:37 PM

Well, it worked fine after I soldered it until I snaped the chip in half while trying to stick it back in the box.

Now my all my windows are stuck down. I just ordered a ECu off Tide Water's ebay store. Hope it comes soon.

pavel · 08-25-2005, 09:49 AM

bad luck Badger! Just keep reminding yourself of all the money you are saving over a dealer repair....

Badger · 08-25-2005, 10:15 AM

true, true.....

08-23-2005, 10:09 AM	#1 (permalink)
Badger Fridge Largemeat Join Date: Aug 2005 Location: Lake Tahoe Posts: 130 Gallery: 0	More Electrical Problems!! HELP! My back windows refuse to roll up. I have replaced the fuses tested the wiring. I have done almost everthing I can think of except take apart the door. The wet and cold is coming, I need those windows up!! Any suggestions? __________________ 97 Disco SD The trail is the thing, not the end of the trail. Travel too fast and you miss all that you are traveling for.

08-23-2005, 10:14 AM	#2 (permalink)
Badger Fridge Largemeat Join Date: Aug 2005 Location: Lake Tahoe Posts: 130 Gallery: 0	Where is the window lift ECU located? Some of these questions may sound silly but I am used to working on VW. __________________ 97 Disco SD The trail is the thing, not the end of the trail. Travel too fast and you miss all that you are traveling for.

08-24-2005, 09:48 AM	#4 (permalink)
Badger Fridge Largemeat Join Date: Aug 2005 Location: Lake Tahoe Posts: 130 Gallery: 0	Thankyou!!!!!!!! Your awesome!! __________________ 97 Disco SD The trail is the thing, not the end of the trail. Travel too fast and you miss all that you are traveling for.

08-24-2005, 08:37 PM	#5 (permalink)
Badger Fridge Largemeat Join Date: Aug 2005 Location: Lake Tahoe Posts: 130 Gallery: 0	Well, it worked fine after I soldered it until I snaped the chip in half while trying to stick it back in the box. Now my all my windows are stuck down. I just ordered a ECu off Tide Water's ebay store. Hope it comes soon. __________________ 97 Disco SD The trail is the thing, not the end of the trail. Travel too fast and you miss all that you are traveling for.

08-25-2005, 10:15 AM	#7 (permalink)
Badger Fridge Largemeat Join Date: Aug 2005 Location: Lake Tahoe Posts: 130 Gallery: 0	true, true..... __________________ 97 Disco SD The trail is the thing, not the end of the trail. Travel too fast and you miss all that you are traveling for.

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-23-2005, 11:21 PM	#3 (permalink)
pavel Senior Member Join Date: Aug 2004 Location: Vancouver, Canada Posts: 433 Gallery: 0	The controller should be behind the glove box. Chances are there is a fault in the circuit board otherwise it is more likely one rear window would still work. For pictures and details on this repair try: www.discoweb.org/window/

08-25-2005, 09:49 AM	#6 (permalink)
pavel Senior Member Join Date: Aug 2004 Location: Vancouver, Canada Posts: 433 Gallery: 0	bad luck Badger! Just keep reminding yourself of all the money you are saving over a dealer repair....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode