New style cupholders - Land Rovers Only

LRDMICHELE · 12-08-2004, 02:45 PM

I took my 97 Disco in for cupholder repair (the kind that slide out of the dashboard and don't hold big cups!) and discovered that there are new style cupholders that are awesome! They screw in to the sides of the shift console area (one holder on each side). They fit small cups as well as big cups when the inner lining is removed. I love them. Listed on my invoice was 1 STC53156SUC KIT, Cup holder (Style D11). Cost $62.00 Parts, $48.00 labor. They would be easy to install by yourself. Sooooo worth it. Woohoo! Michele

Spaced · 12-09-2004, 09:20 PM

Pics?

LRDMICHELE · 12-10-2004, 01:06 PM

Quote:

Originally Posted by Spaced

Pics?

Good idea! Just posted the picture. Michele

dent · 12-10-2004, 01:36 PM

they sure stick out towards the centre quite abit.. wonder if they'll fit a 5sp..
take care
sam

LRDMICHELE · 12-10-2004, 03:04 PM

Quote:

Originally Posted by dent

they sure stick out towards the centre quite abit.. wonder if they'll fit a 5sp..
take care
sam

Good point. I just took some measurements.

They attach to the ridge on the console. From the top of the ridge, they go 2 1/2 inches toward the center. (sorry about our assbackwards measuring system in the US).

My rail ridge is about 12" long. There is not a lot of play on the drivers side due to the emergency brake (only about 6" of play), but on the passenger side, there is the full 12" to play with. You could even mount both cupholders on the passenger side if needed.

The cupholder diameter is 4 3/4 inches.
From outside edge of driver-side mounted cupholder to the outside edge of the passenger-side mounted cupholder is 14". Hopefully you can make use of some of these measurements to see if it would work with your console/gear configuration. M

stageonesimmo · 12-11-2004, 02:44 PM

These are listed in my UK spec RAVE (tech manual) and so I would assume they will fit - I hope they do 'cos they're on my Christmas wish list

for my 300 TDi (5 speed...)

Bri
:camo:

dent · 12-12-2004, 10:06 AM

let me know if it fits as currently i am putting my coffee cup between my legs as it doesn't fit in the cup holder and am worried one day i'm going to spill it and burn me *&^%

take care
sam

LRWheelman · 12-12-2004, 01:10 PM

They will hold most cups, plus you can stash a small tube of graphite for those times when your ignition key is not wanting to turn well. If you install them yourself you do have a bit of choice as to where you place them along the side of the console. My wife got me one for christmas last year and it has been great. LRW

BIRD · 12-15-2004, 10:15 PM

You got a good price on the cup holders. I saw them on line and the dealer for around $100.00. As for the labor. I think you got taken. It only takes a moment or two to put them on.

Gordo T · 12-16-2004, 12:12 PM

I paid $52 and change from Rovers North in Vt and installed them myself in no time at all. Finally I no longer have my coffee cup changing heater/AC controls.

12-08-2004, 02:45 PM	#1 (permalink)
LRDMICHELE Member Join Date: Dec 2004 Location: Portland, OR Posts: 39 Gallery: 0	New style cupholders (Now with photo!) I took my 97 Disco in for cupholder repair (the kind that slide out of the dashboard and don't hold big cups!) and discovered that there are new style cupholders that are awesome! They screw in to the sides of the shift console area (one holder on each side). They fit small cups as well as big cups when the inner lining is removed. I love them. Listed on my invoice was 1 STC53156SUC KIT, Cup holder (Style D11). Cost $62.00 Parts, $48.00 labor. They would be easy to install by yourself. Sooooo worth it. Woohoo! Michele Attached Thumbnails Last edited by LRDMICHELE : 12-10-2004 at 01:01 PM.

12-16-2004, 12:12 PM	#10 (permalink)
Gordo T Member Join Date: Oct 2004 Posts: 38 Gallery: 0	Better Price - Easy Install I paid $52 and change from Rovers North in Vt and installed them myself in no time at all. Finally I no longer have my coffee cup changing heater/AC controls. Last edited by Gordo T : 12-16-2004 at 12:13 PM. Reason: spelling error

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

12-09-2004, 09:20 PM	#2 (permalink)
Spaced Member Join Date: Dec 2004 Posts: 14 Gallery: 0	Pics?

12-10-2004, 01:36 PM	#4 (permalink)
dent beer drinking member Join Date: Aug 2004 Posts: 322 Gallery: 0	they sure stick out towards the centre quite abit.. wonder if they'll fit a 5sp.. take care sam

12-11-2004, 02:44 PM	#6 (permalink)
stageonesimmo Member Join Date: Aug 2004 Location: Glasgow (well, near it anyway) Posts: 28 Gallery: 0	These are listed in my UK spec RAVE (tech manual) and so I would assume they will fit - I hope they do 'cos they're on my Christmas wish list for my 300 TDi (5 speed...) Bri :camo:

12-12-2004, 10:06 AM	#7 (permalink)
dent beer drinking member Join Date: Aug 2004 Posts: 322 Gallery: 0	let me know if it fits as currently i am putting my coffee cup between my legs as it doesn't fit in the cup holder and am worried one day i'm going to spill it and burn me *&^% take care sam

12-12-2004, 01:10 PM	#8 (permalink)
LRWheelman Senior Member Join Date: Oct 2004 Location: Stoutland, Missouri Posts: 138 Gallery: 0	They will hold most cups, plus you can stash a small tube of graphite for those times when your ignition key is not wanting to turn well. If you install them yourself you do have a bit of choice as to where you place them along the side of the console. My wife got me one for christmas last year and it has been great. LRW

12-15-2004, 10:15 PM	#9 (permalink)
BIRD Senior Member Join Date: Dec 2004 Location: Honolulu Hawaii Posts: 362 Gallery: 0	You got a good price on the cup holders. I saw them on line and the dealer for around $100.00. As for the labor. I think you got taken. It only takes a moment or two to put them on.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)