Please tell... - Land Rovers Only

UsedBlue · 04-18-2007, 12:54 PM

Please tell if the CD changer sits alone on 2 peices of wood glued with some black stuff under the seat or if there's actually a case it is supposed to sit in. Someone took mine out before we drove 13 hrs to NY to pick it up and there are 2 small blocks of wood with leftover black gooey stuff....
thank you- as we have nothing to compare our Disco to at all around here.

Elemental · 04-18-2007, 12:55 PM

Actually, more of a L bracket.

UsedBlue · 04-18-2007, 01:00 PM

so this changer sits on top of this L bracket, and do you know the name of this part and if you've seen it being sold online or anything...? thank you so much for your help

Badger1 · 04-18-2007, 01:32 PM

There is an L bracket on either side of the cd changer.

taskforce121 · 04-18-2007, 03:51 PM

Used Blue, the bracket in question is a U shaped bracket that your player sets inside and is secured by screws. Here is what my parts CD (has parts and workshop manual) and i recommend you spend the $30 to get this from BA.

AMR3029 is the bracket part number
the screws are typical M5-20 and can be purchased at Lowes, etc.

don't know about your other post concerning if other radios work in the Disco I as I am a purist and have 2 very factory Rovers, with only Rover parts.

phil

UsedBlue · 04-19-2007, 10:09 AM

Thank you for the part number for that - now I can install this changer. The person we bought this from put the JVC radio in and we want to put an original back in it once we find it for a reasonable price - we just wanted to know if the changer would work off of their crapy JVC. I don't care if the radio is fancier, I too believe it should only have orig parts and opts.

Thanks again

04-18-2007, 12:54 PM	#1 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 81 Gallery: 0	Please tell... Please tell if the CD changer sits alone on 2 peices of wood glued with some black stuff under the seat or if there's actually a case it is supposed to sit in. Someone took mine out before we drove 13 hrs to NY to pick it up and there are 2 small blocks of wood with leftover black gooey stuff.... thank you- as we have nothing to compare our Disco to at all around here.

04-18-2007, 01:32 PM	#4 (permalink)
Badger1 Forward! Join Date: Jul 2005 Location: Loo-eee-ville, KY Posts: 2,153 Gallery: 1	There is an L bracket on either side of the cd changer. __________________ 1997 Disco 1 2000 Disco 2 1989 RR(gone but not forgotten ) Miami Valley Land Rover Society www.mvlrs.com ON WISCONSIN

04-18-2007, 03:51 PM	#5 (permalink)
taskforce121 Member Join Date: May 2006 Posts: 47 Gallery: 0	Used Blue, the bracket in question is a U shaped bracket that your player sets inside and is secured by screws. Here is what my parts CD (has parts and workshop manual) and i recommend you spend the $30 to get this from BA. AMR3029 is the bracket part number the screws are typical M5-20 and can be purchased at Lowes, etc. don't know about your other post concerning if other radios work in the Disco I as I am a purist and have 2 very factory Rovers, with only Rover parts. phil __________________ ------------------------------- We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-18-2007, 12:55 PM	#2 (permalink)
Elemental Senior Member Join Date: Feb 2007 Posts: 3,069 Gallery: 0	Actually, more of a L bracket.

04-18-2007, 01:00 PM	#3 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 81 Gallery: 0	so this changer sits on top of this L bracket, and do you know the name of this part and if you've seen it being sold online or anything...? thank you so much for your help

04-19-2007, 10:09 AM	#6 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 81 Gallery: 0	Thank you for the part number for that - now I can install this changer. The person we bought this from put the JVC radio in and we want to put an original back in it once we find it for a reasonable price - we just wanted to know if the changer would work off of their crapy JVC. I don't care if the radio is fancier, I too believe it should only have orig parts and opts. Thanks again

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)