Sound coming from front after brake job - Land Rover Forums : Land Rover and Range Rover Forum
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 06-16-2005, 12:39 PM Thread Starter
Support Our Troops
 
Join Date: Jan 2005
Location: Hudson Valley, NY
Posts: 3,667
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Sound coming from front after brake job

Okay I had to have the front rotors, pads and calipers replaced on my 97 Disco SE7. The place that did the work always does a great job and is usually very good about not messing things up.

But, 2 days after they did the work I hear a clicking type sound coming from I believe the front driver side wheel area. Then it stopped and now a few days later it came back, but only after driving for about 1/2 hour. Today no noise as of yet. Anybody have any clues? I plan on taking it back to them, but with the noise coming and going not sure if they will be able to hear what it does.
apbtpetey is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 06-16-2005, 12:41 PM
Banned
 
Hyde's Avatar
 
Join Date: Mar 2005
Posts: 527
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Pads need proper shimming. What you are more than likely hearing is the backing of the pads clicking against the caliper. Very common problem with non OEM brake jobs.
Hyde is offline  
post #3 of 10 (permalink) Old 06-16-2005, 02:44 PM Thread Starter
Support Our Troops
 
Join Date: Jan 2005
Location: Hudson Valley, NY
Posts: 3,667
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
So I should take it back then right. Is it bad to drive with them doing this? I have to drive appox 100miles before being able to go to the shop tomorrow
apbtpetey is offline  
post #4 of 10 (permalink) Old 06-16-2005, 04:23 PM
Banned
 
Hyde's Avatar
 
Join Date: Mar 2005
Posts: 527
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
It wont hurt anything other than your nerves. Yes, if someone else was paid to do the brakes, I would take it back and tell them that the pads need to be shimmed.
Hyde is offline  
post #5 of 10 (permalink) Old 06-16-2005, 06:35 PM
Member
 
Join Date: Feb 2005
Location: Perth, Western Australia
Posts: 72
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
It sounds like the anti-vibration shim behind the pad has been left out,causing the pad to rattle.
aussie disco97 is offline  
post #6 of 10 (permalink) Old 07-16-2005, 02:15 PM
Moderator
 
01001010's Avatar
 
Join Date: Jan 2005
Location: Lawrenceville, GA
Posts: 4,576
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I too have a pop that comes from the Driver-side when braking. When I press the pedal, about a second after I hear/feel a small pop. Is this the same problem you're having apbtpetey???

JC...

1996 Discovery SE - The Blue Marlin
1965 Series IIa 109 RHD 2.25L Dsl - Wilks

1965 Series IIa 88' LHD 2.25L Petrol - Fionna
01001010 is offline  
post #7 of 10 (permalink) Old 07-16-2005, 08:21 PM Thread Starter
Support Our Troops
 
Join Date: Jan 2005
Location: Hudson Valley, NY
Posts: 3,667
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by 01001010
I too have a pop that comes from the Driver-side when braking. When I press the pedal, about a second after I hear/feel a small pop. Is this the same problem you're having apbtpetey???
Sorry doesnt sound like the samething as what mine does. I get a clicking type sound. If I hit the brakes it stops.

I havent had time to take it back to the place. So I am just dealing with the noise. I cant hear it if the windows are up. I talked the place and they said just bring it in when I have time and they'll look at it.
apbtpetey is offline  
post #8 of 10 (permalink) Old 08-20-2006, 12:30 PM
Member
 
Join Date: Jul 2006
Posts: 76
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Noises

I have a 96 Disco that I found had no oil in the spindles causing noises in the front end. Cheaper to put in a little oil than most other things. God Bless the Southland.
Rebelman is offline  
post #9 of 10 (permalink) Old 08-20-2006, 08:39 PM
Senior Member
 
drewclare25's Avatar
 
Join Date: Jan 2005
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by Chris Hyde
Pads need proper shimming. What you are more than likely hearing is the backing of the pads clicking against the caliper. Very common problem with non OEM brake jobs.

i have the same problem...the inner brake pad is sliding, and clicking everythign the wheel goes around. If i get OEM brake pads, will it be fixed...or is a clip broken or something?

Best 4x4xFar

97 Green D1
3" BB springs
pro comp es9000 shocks
32x11.50 BFG Mud Terrains
15" american racing steel wheels
flowmaster 40 series dual pipes
mantec snorkel
drewclare25 is offline  
post #10 of 10 (permalink) Old 08-29-2006, 02:51 PM
Jeffrey
 
Scort007's Avatar
 
Join Date: Aug 2005
Location: Laurel, MD
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Wheel Noise

Same here I found that the top bolt was not put on and it may have fallen off while driveing. I had it replaced. You might want to check and make sure that the bolts are tight. And Shimms may be you issue also. When metal get hot it expands.
Scort007 is offline  
Sponsored Links
Advertisement
 
Reply

  Land Rover Forums : Land Rover and Range Rover Forum > Land Rover Model Forums > Discovery Series I

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Land Rover Forums : Land Rover and Range Rover Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome