Turn signals not working - Land Rovers Only

weldontr · 01-21-2006, 03:38 PM

Yesterday I lost turn signals...Brake lights work, Running lights work, but no flashers??? I have checked interior fuse box but can't seem to locate a blown fuse

johnjcoyle · 01-21-2006, 03:45 PM

Check the flasher relay, ? could be not pluggged in correctly. when you put on the hazzard warning lights / 4 way flashers does that circuit work ?

Regards,

John

weldontr · 01-21-2006, 03:49 PM

hazards do not work either...relay?

johnjcoyle · 01-21-2006, 03:55 PM

Sounds like it could be a busted relay to me, They are not that expensive, do you see which relay it is ?

Pull it out and try re fitting it, if this does not work, see if you have one in another vehicle that matches it , try this one to see if that works, if so then its time to go shopping, try

http://www.roverparts.com/ Atlantic British, under their dropdown menu you will find the relays.

Good Luck.

John.

weldontr · 01-21-2006, 04:10 PM

I'm gonna check the relays, haven't tried that yet...will let you know...THANX!!!

weldontr · 01-22-2006, 02:40 PM

replaced the Relay switch w/ a Tridon EP26...I think it is intended for Chryler products but it works...PROBLEM SOLVED!!!

johnjcoyle · 01-22-2006, 03:44 PM

good job ,,,,

pleased you got it fixed,

01-21-2006, 03:38 PM	#1 (permalink)
weldontr Member Join Date: Jan 2006 Posts: 14 Gallery: 0	Turn signals not working Yesterday I lost turn signals...Brake lights work, Running lights work, but no flashers??? I have checked interior fuse box but can't seem to locate a blown fuse

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

01-21-2006, 03:45 PM	#2 (permalink)
johnjcoyle Member Join Date: May 2005 Location: Aylmer / Canada Posts: 50 Gallery: 0	Check the flasher relay, ? could be not pluggged in correctly. when you put on the hazzard warning lights / 4 way flashers does that circuit work ? Regards, John

01-21-2006, 03:49 PM	#3 (permalink)
weldontr Member Join Date: Jan 2006 Posts: 14 Gallery: 0	hazards do not work either...relay?

01-21-2006, 03:55 PM	#4 (permalink)
johnjcoyle Member Join Date: May 2005 Location: Aylmer / Canada Posts: 50 Gallery: 0	Sounds like it could be a busted relay to me, They are not that expensive, do you see which relay it is ? Pull it out and try re fitting it, if this does not work, see if you have one in another vehicle that matches it , try this one to see if that works, if so then its time to go shopping, try http://www.roverparts.com/ Atlantic British, under their dropdown menu you will find the relays. Good Luck. John.

01-21-2006, 04:10 PM	#5 (permalink)
weldontr Member Join Date: Jan 2006 Posts: 14 Gallery: 0	I'm gonna check the relays, haven't tried that yet...will let you know...THANX!!!

01-22-2006, 02:40 PM	#6 (permalink)
weldontr Member Join Date: Jan 2006 Posts: 14 Gallery: 0	replaced the Relay switch w/ a Tridon EP26...I think it is intended for Chryler products but it works...PROBLEM SOLVED!!!

01-22-2006, 03:44 PM	#7 (permalink)
johnjcoyle Member Join Date: May 2005 Location: Aylmer / Canada Posts: 50 Gallery: 0	good job ,,,, pleased you got it fixed,

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)