volt/oil /temp gauges on a d-1 - Land Rovers Only

daniels disco · 04-11-2008, 09:01 AM

I am thinking of adding a 3 gauge set-up to my '94 disco (3.9l) My oil sending unit leaks and needs to be changed, my concern is the threading on the unit, is it a fine thread??? does anyone know the wrench size to remove the stock sending unit?? thanks, dan

afirover · 04-11-2008, 09:20 PM

what range are you thinking of useing ?
and you should ask PT SCHRAM if he knows the rest of the info you need just pm his ass

daniels disco · 04-12-2008, 08:57 AM

just the standard 3 gauge set up. oil press.- 0-80 psi, h2o- 130-280 , amps...

afirover · 04-12-2008, 04:08 PM

you might look for a smaller range on the oil psi I have never seen a rover with more than 30ish psi

daniels disco · 04-14-2008, 01:31 PM

well.., I am gonna bail on the idea.., seems all the gauges are set-up with a small oil supply line over the motor, thru the firewall and to the back of the gauge.., looks like a oil-based fire waiting to happen!!! run !!! thanks to all, dan

afirover · 04-15-2008, 06:53 AM

you give up to ez

we are replacing all the gauges in ovis1 and adding more like fuel line psi and water psi and air fuel ratio all this in the truck in the center so both pass and driver can see and montor ...... just use an electric one

Stewart Warner Electric Oil Pressure Gauges - Ford Mustang

enjoy afi

04-11-2008, 09:01 AM	#1 (permalink)
daniels disco daniels disco Join Date: Feb 2008 Location: corpus christi tx. Posts: 13 Gallery: 0	volt/oil /temp gauges on a d-1 I am thinking of adding a 3 gauge set-up to my '94 disco (3.9l) My oil sending unit leaks and needs to be changed, my concern is the threading on the unit, is it a fine thread??? does anyone know the wrench size to remove the stock sending unit?? thanks, dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
After market gauges install question...	atvsmurf	Range Rover Classic	1	12-10-2007 06:59 PM
White Gauges For DI...Do they Exist?	MightyMax	Discovery Series I	2	04-21-2005 10:09 PM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-11-2008, 09:20 PM	#2 (permalink)
afirover AFIROVER Join Date: Feb 2006 Location: INDY IN Posts: 229 Gallery: 0	what range are you thinking of useing ? and you should ask PT SCHRAM if he knows the rest of the info you need just pm his ass

04-12-2008, 08:57 AM	#3 (permalink)
daniels disco daniels disco Join Date: Feb 2008 Location: corpus christi tx. Posts: 13 Gallery: 0	just the standard 3 gauge set up. oil press.- 0-80 psi, h2o- 130-280 , amps...

04-12-2008, 04:08 PM	#4 (permalink)
afirover AFIROVER Join Date: Feb 2006 Location: INDY IN Posts: 229 Gallery: 0	you might look for a smaller range on the oil psi I have never seen a rover with more than 30ish psi

04-14-2008, 01:31 PM	#5 (permalink)
daniels disco daniels disco Join Date: Feb 2008 Location: corpus christi tx. Posts: 13 Gallery: 0	well.., I am gonna bail on the idea.., seems all the gauges are set-up with a small oil supply line over the motor, thru the firewall and to the back of the gauge.., looks like a oil-based fire waiting to happen!!! run !!! thanks to all, dan

04-15-2008, 06:53 AM	#6 (permalink)
afirover AFIROVER Join Date: Feb 2006 Location: INDY IN Posts: 229 Gallery: 0	you give up to ez we are replacing all the gauges in ovis1 and adding more like fuel line psi and water psi and air fuel ratio all this in the truck in the center so both pass and driver can see and montor ...... just use an electric one Stewart Warner Electric Oil Pressure Gauges - Ford Mustang enjoy afi

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)