Wheel seal replacement - Land Rovers Only

GentrysRover · 02-13-2005, 04:39 PM

Hey y'all

How hard is it too replace a rear wheel seal in a 95 disco.. Mine is leaking.. Is it a easy job?? let me know

Eric

Blackdown4x4 · 02-13-2005, 11:39 PM

If its the inner seal (leaking from behind the brake disc) with the right tools about hlaf an hour the hub has to come off.

1. Take off caliper
2. Remove half shaft
3. Take off bearing retaining nuts
4. Pull off hub complete
5. Remove old seal

Now all in reverse the torque for the wheel bearing nuts is 50nm.

Any problems mail me

Regards

Dave

Toowild78 · 05-12-2008, 09:34 AM

does the same apply for an 03?

02-13-2005, 04:39 PM	#1 (permalink)
GentrysRover Senior Member Join Date: Jan 2005 Location: VERMONT "SNOW COUNTRY" Posts: 167 Gallery: 0	Wheel seal replacement Hey y'all How hard is it too replace a rear wheel seal in a 95 disco.. Mine is leaking.. Is it a easy job?? let me know Eric __________________ undefinedundefined

05-12-2008, 09:34 AM	#3 (permalink)
Toowild78 Member Join Date: Apr 2008 Location: W.V. Posts: 22 Gallery: 0	does the same apply for an 03? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

02-13-2005, 11:39 PM	#2 (permalink)
Blackdown4x4 Member Join Date: Feb 2005 Location: Exeter, Devon Posts: 16 Gallery: 0	If its the inner seal (leaking from behind the brake disc) with the right tools about hlaf an hour the hub has to come off. 1. Take off caliper 2. Remove half shaft 3. Take off bearing retaining nuts 4. Pull off hub complete 5. Remove old seal Now all in reverse the torque for the wheel bearing nuts is 50nm. Any problems mail me Regards Dave

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)