|Topic Review (Newest First)|
|02-11-2019 07:08 AM|
I am reviving this thread in hopes of converting my 2009 LR3. I have the opportunity to get a heated wheel with clock spring off of a 2012 LR4. Is there anything else that I would need for this conversion or would this be it?
|07-15-2015 06:53 AM|
|dpedraza||Lol That's pretty funny I just start the car and let it sit for a little bit to warm before I go off on any adventures. My chevy has remote start i use that all the time in the winter.. It's supposed to turn on my heated seats but never seems to|
|07-10-2015 09:56 AM|
|brjp1||Sorry to dredge up this thread but really need to know where I can get this two pronged connector so I can get power to my heated steering wheel.|
|12-24-2014 11:41 PM|
I wish somebody already converted any steering wheel to the disco 2... With its crappy horns, wrap worn way before I owned it. This thread is ancient. Somebody shoulda done all the hard work for me by now....
Sent from AutoGuide.com Free App
|12-24-2014 09:44 AM|
I wish I had one. Super Awesome! Great job!!!
|12-24-2014 08:32 AM|
|degen||That's dedication, heated steering wheels are amazing...|
|12-16-2014 05:00 AM|
Hi new here. I know this thread is probably dead. But I'm interested in doing to retro fit for the heated steering wheel.
Why did you need to steerin wheels? And which one did you end up using ? The RRS wheel or the LR4 wheel.
And the clock spring: was it from a RR or LR4? I found a heated one and wanted to know if it would work. It's from a RR.
I can and probably will PM you since this thread is 4 years old now.
Any info will help Thanks.
|01-02-2012 11:22 AM|
|Paul K||My '07 RR L322 had a heated steering wheel, but it got so hot I never used the heat feature. I hope yours is better.|
|12-24-2011 04:27 AM|
|gruodiz||You Photobucket link doesn't work, try to post again|
|12-23-2010 08:50 AM|
Originally Posted by O-live View Post
Just to give you a rough estimate, the clockspring alone was $400. PLUS, you need to buy 2 separate heated wheels (the 2009 RRS heated wheel didn't come with an ECU for the wheel), but the 2010 LR4 wheel did. And each wheel were both over $500 at least.
So yea, it wasn't cheap. But, well worth the mod in my opinion.
|12-22-2010 05:22 PM|
Thats great!that doesnt look like a cheap job at all???out of curiosity?$$$?
up here in the great white north it gets pretty frosty.
|12-06-2010 07:25 AM|
Very nice. Man I wish my Rangie had a heated steering wheel. I wonder why more vehicles these days don't offer it as an option. Heck, most cars now can be had with heated glass, heated mirrors, and heated seats. So what's the deal with heated steering wheels? If offered, that would be an option I'd spring for everytime. My hands get cold very easily. Living in the 2nd coldest town in Colorado, a heated steering wheel would be awesome.
|12-06-2010 07:02 AM|
|ktm_525||Good work. I took the lazy route.....I wear gloves.|
|12-03-2010 06:46 PM|
Finally Installed a Heated Steering Wheel In My 2008 LR3 HSE!
I finally did it! I successfully modified and installed a heated steering wheel into my 2008 LR3 HSE! This project took several weeks to do in total. Had to wait for several needed parts to arrive from Roverparts (eBay). By no means was this a cheap modification. But it was a lot of fun to do and is so worth it in my opinion.
I love my LR3 and since buying it in 2008, my only gripe about it was that it didn't come with a heated wheel. I always felt that adding a heated wheel would be simple. After all, the 2009 RRS came with it as an option and the wheel is identical to my LR3.
In addition to the heated steering wheel, I found out that I needed several more parts to make the heating wheel function to work such as the switch, clockspring, ECU and wire harnesses and connectors (which came with the ECU and steering wheel).
I also was able to get some instructional feedback from Disco3.co.uk under the LR4, in-car electronics section. I am thankful to several posters on that site who helped guide me throughout this ordeal.
Since I am only allowed 4 pictures to post here, I included a link to my photobucket album where I have more pics of this modification.
Image hosting, free photo sharing & video sharing at Photobucket
My hands are now TOASTY, TOASTY, TOASTY!
Some pics below:
New clockspring (Note the 12 volt connector for the heated wheel at the 12 o'clock position)
12 volt source connected into the side port of the new clockspring
Heated wheel ECU which controls heating for the wheel
All warm and toasty! NOTE the illuminated "on" indicator on the switch