Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
1,760 Posts
I was wondering if someone could help clarify something for me..

I have a 2003 DII and it has some transfer case problems. The previous owner included a transfer case out of a 2004 that he didn't put in yet.

What are my options for fitting the 2004 properly in the '03....wasn't there some difference with CDL and such? Do I need extra parts from an earlier Rover, or from an 04...?

Is there anything else worth doing to the 04 case before fitting... All I know is it's a "good used" transfer case... that worries me a bit, as I don't want to just throw it in and hope it works.

Any tips?

Thanks,
Pete
Hi, if i was you i'd buy a master rebuild kit and fit it into the spare just to be on the safe side cos in one old unused transfer box it's possible that the seals are stiffened and they'll start to leak once exposed to heat and oil pressure and i'm sure that the center diff dome washers are completely worn as well.

see maybe you find one like this closer to you Land Rover LT230 Transfer Box Master Rebuild Kit | eBay
 

·
Premium Member
Joined
·
1,760 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top