[ezatrine]

Does anyone have installation instructions or a diagram for the rear-seat, pop-out cupholder assembly? The spring loaded assembly was kid tested and failed. It now requires reassembly. Thanks.

 

[ezatrine]

Follow Up to Rear Cup Holders

Problem Solved. The entire assembly must be removed from the arm rest to correctly reinstall the spring mechanism and deployable cup holder assembly. To remove there were two clips on each side that need to be depressed in order to pull the entire assembly out.

 

[SCSL]

The entire assembly must be removed from the arm rest to correctly reinstall the spring mechanism and deployable cup holder assembly.

Yep, that's a Land Rover alright,,,,,
Kinda like replacing a solenoid on the t-case,,, replacing/reversing the rear tire carrier,,,
etc

 

[plastic]

is there a way to make sure the same problem won't happen again? Mine is broken right now, but i'm not sure it's worth it to fix it.