Land Rover and Range Rover Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have been reading a bunch of posts about removing and cleaning the oil separator in the right side v/c. My problem is when I pulled the hose off, the fitting on the v/c is closed at the top except for a small hole. I put a pick in the hole and there is something close to the top and I suspect it's the separator. From what I have found this style was used on the 2003-2004 4.6 Disco and other posts say it can be cleaned and removed I just need to know how......THANKS!!!!
 

· Premium Member
Joined
·
16,548 Posts
Leave it alone. if it is dirty or plugged, spray carb cleaner on it a couple of time.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top