Land Rover and Range Rover Forum banner
1 - 1 of 1 Posts

·
Drives like an old man
Joined
·
446 Posts
The vacuum like noise is probably the SAI pump. That's normal; if the engine were starting, you'd not hear this.

Whatever you do, DO NOT RELY ON THE TEMP GAUGE!!! It's worse than useless; it gives a false sense that everything's fine. Get a separate temp gauge, one that connects to the water system or one that connects via the OBDII port. It's the only way to really know what's going on.

Speaking of OBDII, if you don't have a scanner, get one. I'll bet you have a lot of codes stored up that will point you in the right direction.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top